Abstract:Light olefins are mainly made from petrochemical industry. These short-chain hydrocarbons including ethylene and propylene are traditionally produced by steam cracking of naphtha or as byproducts of oil refining processes. Fischer−Tropsch synthesis obtains long-chain hydrocarbons from syngas (a mixture of H2 and CO). A promising process to produce lower olefins from synthesis gas is so-called FTO process. A variety of catalysts have been explored for FTO reaction. Unsupported iron oxide catalysts have been investigated, and in some cases they have exhibited high selectivity towards lower olefins when the iron was modified by the addition of promoters. However, the bulk catalysts are mechanically unstable when the reaction is performed at high temperature, which would swiches product selectivity to higher hydrocarbons. Under these conditions, the undesirable boundouard reaction 2CO(g)→C(s) + CO2(g), leads to the deposition of carbon. The poor mechanical stability of the bulk catalysts may lead to plugging of the catalyst bed in fixed-bed operation or to fouling of the separation equipment in a fluidized bed process. To overcome the low activity and stability problems, the use of supported iron catalyzts have been explored. The FTO reaction is a structure sensitive reaction. The catalytic performance is strongly related to the particle size of the metal or active phase. The addition of support changed the morphology of the catalyst and affects the particles size and dispersion. Iron forms mixed oxides when supported on alumina or silica which are difficult to reduce, and the formation of the active iron carbide phase is hindered. The MgO supported catalyst shown a more dispersion of the particles and also has shown lower particles adhesion, consequently shown a better catalytic performance. In the case of CNF supported catalysts, iron loading is directly related to particle size, thus higher iron contents result in larger iron-containing particles. The iron nanoparticles supported on CNF have narrow size distributions and they are homogeneously distributed on the support . In order to optimize the support of FTO catalysts, MgO modified Al2O3 supports have been studied in this research.

Hierarchical structured α-Al2O3 supported S-promoted Fe catalysts for direct conversion of syngas to lower olefins.

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Size-controlled Synthesis of Hematite -Fe2o3 Nanodisks Closed with (0001) Basal Facets and {11-20} Side Facets and Their Catalytic Performance for CO2 Hydrogenation

Syngas to Olefins with Low CO2 Formation by Tuning the Structure of FeCx-MgO-Al2O3 Catalysts

The influence of hierarchical zeolite composition and pore structure on behavior of cobalt-based Fischer–Tropsch synthesis catalysts

Effects of Ag Promotion for Co/Al2O3 Catalyst in Fischer-Tropsch Synthesis

Tuning the Surface Carbonaceous Species in Syngas-to-Olefin Reaction by Metal-Support Interaction: A Fe-Mn-Al Ternary System Study

Synthesis of hierarchical SAPO-34 to improve the catalytic performance of bifunctional catalysts for syngas-to-olefins reactions

MnOx Promotional Effects on Olefins Synthesis Directly from Syngas over Bimetallic Fe‐MnOx/SiO2 Catalysts

Selective production of light α-olefins and long-chain α-olefins from CO2/H2 and CO/H2 over iron-based catalysts: Effects of Na2S and H2O

Regulating Iron Species Compositions by Fe-Al Interaction in CO2 Hydrogenation

Synthesis of hierarchical Fe-incorporated ZSM-5 molecular sieves with an Fe-based metal-organic framework as a mesoporogen and iron source for catalytic pyrolysis of alkanes

Effect of support basicity on iron-based catalysts for Fischer-Tropsch synthesis

Performance of Supported Fe Based Catalyst for Synthesis of Light Alkenes from Syngas

Development and Up‐scaling of Iron‐based Catalysts for Fischer‐Tropsch Synthesis of Higher Alcohols

MgO modification of Fe-based Al2O3 catalysts for the coversion of syngas to light olefins

Effective Iron Catalysts Supported on Mixed MgO-Al<sub>2</sub>O<sub>3</sub> for Fischer-Tropsch Synthesis to Olefins

A CoFe Bimetallic Catalyst for the Direct Conversion of Syngas to Olefins

Effects of Al, Si, Ti, Zr Promoters on Catalytic Performance of Iron-Based Fischer–Tropsch Synthesis Catalysts

Effect of Graphitic Carbon Modification on the Catalytic Performance of Fe@SiO2-GC Catalysts for Forming Lower Olefins Via Fischer-Tropsch Synthesis.

Impact of Zn/Cr Ratio on ZnCrOx-SAPO-34 Bifunctional Catalyst for Direct Conversion of Syngas to Light Olefins