Abstract:Light olefins are mainly made from petrochemical industry. These short-chain hydrocarbons including ethylene and propylene are traditionally produced by steam cracking of naphtha or as byproducts of oil refining processes. Fischer−Tropsch synthesis obtains long-chain hydrocarbons from syngas (a mixture of H2 and CO). A promising process to produce lower olefins from synthesis gas is so-called FTO process. A variety of catalysts have been explored for FTO reaction. Unsupported iron oxide catalysts have been investigated, and in some cases they have exhibited high selectivity towards lower olefins when the iron was modified by the addition of promoters. However, the bulk catalysts are mechanically unstable when the reaction is performed at high temperature, which would swiches product selectivity to higher hydrocarbons. Under these conditions, the undesirable boundouard reaction 2CO(g)→C(s) + CO2(g), leads to the deposition of carbon. The poor mechanical stability of the bulk catalysts may lead to plugging of the catalyst bed in fixed-bed operation or to fouling of the separation equipment in a fluidized bed process. To overcome the low activity and stability problems, the use of supported iron catalyzts have been explored. The FTO reaction is a structure sensitive reaction. The catalytic performance is strongly related to the particle size of the metal or active phase. The addition of support changed the morphology of the catalyst and affects the particles size and dispersion. Iron forms mixed oxides when supported on alumina or silica which are difficult to reduce, and the formation of the active iron carbide phase is hindered. The MgO supported catalyst shown a more dispersion of the particles and also has shown lower particles adhesion, consequently shown a better catalytic performance. In the case of CNF supported catalysts, iron loading is directly related to particle size, thus higher iron contents result in larger iron-containing particles. The iron nanoparticles supported on CNF have narrow size distributions and they are homogeneously distributed on the support . In order to optimize the support of FTO catalysts, MgO modified Al2O3 supports have been studied in this research.

Performance of Supported Fe Based Catalyst for Synthesis of Light Alkenes from Syngas

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

The Effect of Na Promoter on Fe-Based Catalyst for CO2 Hydrogenation to Alkenes

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Sodium promoter on iron-based catalyst for direct catalytic synthesis of light alkenes from syngas

Effect of Li Promoter on FeMn/CNTs for Light Olefins from Syngas

An investigation of the catalytic performance of Fe–Mn/Al2O3 nanocatalyst for light olefins production using RSM method and kinetic study

Comparison of Femn, Femnna and Femnk Catalysts for the Preparation of Light Olefins from Syngas

Tuning the Surface Carbonaceous Species in Syngas-to-Olefin Reaction by Metal-Support Interaction: A Fe-Mn-Al Ternary System Study

MgO modification of Fe-based Al2O3 catalysts for the coversion of syngas to light olefins

Carbon-Supported Fe-Based Catalyst for Thermal-Catalytic CO2 Hydrogenation into C2+ Alcohols: The Effect of Carbon Support Porosity on Catalytic Performance

Novel Fe/MnK‐CNTs Nanocomposites As Catalysts for Direct Production of Lower Olefins from Syngas

Ethanol Synthesis from Syngas on Mn- and Fe-promoted Rh/γ-Al2O3

Revisiting the Syngas Conversion to Olefins over Fe-Mn Bimetallic Catalysts: Insights from the Proximity Effects

Liquid Fuel Synthesis from Syngas over Fe/AC Catalyst

Synthesis of Light Olefins from CO2 Hydrogenation on FeCoMnK/BeO Catalysts and in Situ FT-IR Studies

High-temperature Fischer–Tropsch Synthesis over the Li-promoted FeMnMgOx Catalysts

Syngas to Olefins with Low CO2 Formation by Tuning the Structure of FeCx-MgO-Al2O3 Catalysts

Effect of Si/Al ratio on performance of Pt–Sn-based catalyst supported on ZSM-5 zeolite for n-butane conversion to light olefins

Synergetic effects of Al addition on the performance of CoFe 2 O 4 catalyst for hydrogen production and filamentous carbon formation from direct cracking of methane

NiFe and CoFe nanocatalysts supported on highly dispersed alumina-silica: Structure, surface properties, and performance in CO2 methanation