Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Preparation and Characterization of Fe/AC Catalysts for Synthesis of Light Olefins via Carbon Monoxide Hydrogenation

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Activation atmospheres on structure-performance relationship of K-promoted Fe catalysts for lower olefin synthesis from CO2hydrogenation

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Carbon Dispersed Iron-Manganese Catalyst for Light Olefin Synthesis from CO Hydrogenation

The Construction of Iron-Based Catalysts Encapsulated by Graphite for CO2 Hydrogenation to Light Olefins

In situ synthesis of highly dispersed Fe/C catalysts with pomelo peel as carbon source in CO 2 hydrogenation to light olefins

Direct Carbon Dioxide Hydrogenation to Long-Chain Α-Olefins over FeMnK Catalysts

Activated Carbon Supported Iron Catalyst for the Fischer-Tropsch Synthesis

Fe-MOF-derived Highly Active Catalysts for Carbon Dioxide Hydrogenation to Valuable Hydrocarbons

Selective Hydrogenation of CO2 and CO to Useful Light Olefins over Octahedral Molecular Sieve Manganese Oxide Supported Iron Catalysts

Carbon supported iron catalyst for the fischer-Tropsch synthesis

Cellulose modified iron catalysts for enhanced light olefins and linear C5+ α-olefins from CO hydrogenation

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

Boosting Light Olefin Selectivity in CO2 Hydrogenation by Adding Co to Fe Catalysts Within Close Proximity

Performance of Co/AC Catalyst in Synthesizing Liquid-Fuel

Novel Fe/MnK‐CNTs Nanocomposites As Catalysts for Direct Production of Lower Olefins from Syngas

Carbon Modified Fe–Mn–K Catalyst for the Synthesis of Light Olefins from CO Hydrogenation

Synthesis of Light Olefins from CO2 Hydrogenation on FeCoMnK/BeO Catalysts and in Situ FT-IR Studies

Enhancing CO2 Hydrogenation Performance Via the Synergistic Effects of Iron Carbides and Iron Oxides

Catalyst applied to producing of methane and co producing low carbon olefin by converting syngas and preparation and application thereof