Abstract:Syngas conversion is a key platform for efficient utilization of various carbon-containing resources including coal, natural gas, biomass, organic wastes, and even CO2. One of the most classic routes for syngas conversion is Fischer-Tropsch synthesis (FTS), which is already available for commercial application. However, it still remains a grand challenge to tune the product distribution from paraffins to value-added chemicals such as olefins and higher alcohols. Breaking the selectivity limitation of the Anderson-Schulz-Flory (ASF) distribution has been one of the hottest topics in syngas chemistry.Metallic Co0 is a well-known active phase for Co-catalyzed FTS, and the products are dominated by paraffins with a small amount of chemicals (i.e., olefins or alcohols). Specifically, a cobalt carbide (Co2C) phase is typically viewed as an undesirable compound that could lead to deactivation with low activity and high methane selectivity. Although iron carbide (FexC) can produce olefins with selectivity up to ∼60%, the fraction of methane is still rather high, and the required high reaction temperature (300-350 °C) typically causes coke deposition and fast deactivation. Recently, we discovered that Co2C nanoprisms with preferentially exposed facets of (020) and (101) can effectively produce olefins from syngas conversion under mild reaction conditions with high selectivity. The methane fraction was limited within 5%, and the product distribution deviated greatly from ASF statistic law. The catalytic performances of Co2C nanoprisms are completely different from that reported for the traditional FT process, exhibiting promising potential industrial application.This Account summarizes our progress in the development of Co2C nanoprisms for Fischer-Tropsch synthesis to olefins (FTO) with remarkable efficiencies and stability. The underlying mechanism for the observed unique catalytic behaviors was extensively explored by combining DFT calculation, kinetic measurements, and various spectroscopic and microscopic investigation. We also emphasize the following issues: particle size effect of Co2C, the promotional effect of alkali and Mn promoters, and the role of metal-support interaction (SMI) in fabricating supported Co2C nanoprisms. Specially, we briefly review the synthetic methods for different Co2C nanostructures. In addition, Co2C can also be applied as a nondissociative adsorption center for higher alcohol synthesis (HAS) via syngas conversion. We also discuss the construction of a Co0/Co2C interfacial catalyst for HAS and demonstrate how to tune the reaction network and strengthen CO nondissociative adsorption ability for efficient production of higher alcohols. We believe that the advances in the development of Co2C nanocatalysts described here present a critic step to produce chemicals through the FTS process.

Electronically Activated Fe 5 C 2 via N-Doped Carbon to Enhance Photothermal Syngas Conversion to Light Olefins

Unleashing The Full Potential of Photo‐Driven Co Hydrogenation to Light Olefins Over Carbon‐Coated CoMn‐Based Catalysts

Light‐Enhanced Conversion of CO2 to Light Olefins: Basis in Thermal Catalysis, Current Progress, and Future Prospects

Photo-Driven Syngas Conversion to Lower Olefins over Oxygen-Decorated Fe5C2 Catalyst

Photothermal Conversion of CO2 with Tunable Selectivity Using Fe-Based Catalysts: from Oxide to Carbide

Photothermal Conversion of CO 2 with Tunable Selectivity Using Fe-Based Catalysts: From Oxide to Carbide

Hydrophobic Fe‐Based Catalyst Derived from Prussian Blue for Enhanced Photothermal Conversion of Syngas to Light Olefins

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Fe‐Based Catalysts for the Direct Photohydrogenation of CO 2 to Value‐Added Hydrocarbons

Photothermal Conversion of CO2 into Lower Olefins at the Interface of the K-promoted Ru/Fe3O4 Catalyst

Reductive Transformation of Layered-Double-Hydroxide Nanosheets to Fe-Based Heterostructures for Efficient Visible-Light Photocatalytic Hydrogenation of CO

Cost‐Effective Synthesis of Fe5C2 Catalyst From Nanosized Zero‐Valent Iron to Achieve Efficient Photothermocatalytic CO Hydrogenation to Light Olefins

Metal-organic framework-derived Fe3O4-FeCx catalyst for direct CO2 hydrogenation to light olefins

ZSM‐5‐Promoted Co‐Based Light‐Assisted Thermocatalytic Fischer–Tropsch Synthesis Catalyst for Production of Liquid Fuel

Titania‐Supported Ni 2 P/Ni Catalysts for Selective Solar‐Driven CO Hydrogenation

Boron-doped CN supported metallic Co catalysts with interfacial electron transfer for enhanced photothermal CO hydrogenation

Iron Catalyst Encapsulated in Carbon Nanotubes for CO Hydrogenation to Light Olefins

Cobalt Carbide Nanocatalysts for Efficient Syngas Conversion to Value-Added Chemicals with High Selectivity

Mechanistic insight into accelerating of light olefin products by surface OH* group on the Fe 5 C 2 catalyst

Recent advances in Co2C-based nanocatalysts for direct production of olefins from syngas conversion

A CoFe Bimetallic Catalyst for the Direct Conversion of Syngas to Olefins