Abstract:Fischer-Tropsch synthesis is an important way to replace crude oil resources to sustainable energy in the future, and an important process for catalytic conversion of syngas into clean fuel and high value-added chemicals. Iron-based catalysts have been widely used in industrial production due to their advantages of low cost, flexible operation and water-gas conversion activity. However, the phase change of iron-based catalysts during the reaction process is very complex. As many as seven iron species including elemental iron and different types of iron oxide iron carbide are considered to have Fischer-Tropsch synthesis activity. It is very important to understand the evolution of iron species and their roles in the reaction for clarifying the structure-activity relationship of catalysts and designing efficient industrial catalysts. Hematite Fe 3 O 4 is often used as the precursor oxide of iron based catalyst, which is converted into iron carbide during the reaction process. It is often considered as an inactivated phase and has high water-gas conversion activity, leading to high CO 2 selectivity. Wang et al prepared Fe 3 O 4 catalyst by using metal organic framework（MOF） as precursor, which would be converted into Fe 3 O 4 @Fe 5 C 2 during the reaction process. Therefore, the author believed that Fe 5 C 2 phase was the key to the catalyst activity. Herein, We used graphene as the support and used the classic preparation method of supported catalyst-impregnation method to prepare iron-based catalyst with different loading capacity. The Fe 3 O 4 particles were grown by calcinating at high temperature to prevent excessive carbonization in the reaction process, and the properties of Fe 3 O 4 phase were investigated. The results of reaction performance test show that Fe 3 O 4 species itself has a certain activity of CO hydrogenation, and the carbonization process of large Fe 3 O 4 particles（＞200 nm） in the reaction process will be inhibited to a certain extent. With the increase of reaction time, part of Fe 3 O 4 is carbonized into iron carbide, and the catalyst activity increases, indicating that the activity of iron carbide species is higher than that of Fe 3 O 4 .

Cost‐Effective Synthesis of Fe5C2 Catalyst From Nanosized Zero‐Valent Iron to Achieve Efficient Photothermocatalytic CO Hydrogenation to Light Olefins

Iron Catalyst Encapsulated in Carbon Nanotubes for CO Hydrogenation to Light Olefins

Electronically Activated Fe 5 C 2 via N-Doped Carbon to Enhance Photothermal Syngas Conversion to Light Olefins

Enhancing CO 2 hydrogenation performance via the synergistic effects of iron carbides and iron oxides

Fe5c2 Nanoparticles: A Facile Bromide-Induced Synthesis and As an Active Phase for Fischer-Tropsch Synthesis

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Size-controlled Synthesis of Hematite -Fe2o3 Nanodisks Closed with (0001) Basal Facets and {11-20} Side Facets and Their Catalytic Performance for CO2 Hydrogenation

Fe‐Based Catalysts for the Direct Photohydrogenation of CO 2 to Value‐Added Hydrocarbons

Reductive Transformation of Layered-Double-Hydroxide Nanosheets to Fe-Based Heterostructures for Efficient Visible-Light Photocatalytic Hydrogenation of CO

Metal-organic framework-derived Fe3O4-FeCx catalyst for direct CO2 hydrogenation to light olefins

Selective fabrication of χ-Fe5C2 by interfering surface reactions as a highly efficient and stable Fischer-Tropsch synthesis catalyst

Construction of Synergistic Fe5C2/Co Heterostructured Nanoparticles As an Enhanced Low Temperature Fischer–Tropsch Synthesis Catalyst

In situ synthesis of highly dispersed Fe/C catalysts with pomelo peel as carbon source in CO 2 hydrogenation to light olefins

Preparation and Characterization of Fe/AC Catalysts for Synthesis of Light Olefins via Carbon Monoxide Hydrogenation

Topotactic Transformation of Metal–Organic Frameworks to Iron-based Catalysts for the Direct Hydrogenation of CO2 to Olefins

Preparation of Graphene-Supported Fe3O4 Model Catalysts for Fischer-Tropsch Synthesis

Superparamagnetic Iron Oxide Nanoparticles on ZrO2 as Catalysts for CO2 Hydrogenation to Lower Olefins

Preparation of Iron Carbides Formed by Iron Oxalate Carburization for Fischer–Tropsch Synthesis

Nanocrystalline Iron–boron Catalysts for Low-Temperature CO Hydrogenation: Selective Liquid Fuel Production and Structure–activity Correlation

Mechanistic Insight into Hydrocarbon Synthesis via CO2 Hydrogenation on χ-Fe5C2 Catalysts

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins