Abstract:A series of nanofibrous alumina materials with diameters of 4-6 nm and with different aspect ratios ranging from 3 to 16 were prepared. Cobalt impregnated catalysts were prepared by means of incipient wetness impregnation on alumina nanofibers while the 'rearranged' catalysts were prepared by using ultrasonication assistance to mix the fibers with the Co3O4 nanoparticles. The effects of the alumina nanofiber aspect ratios on the Co catalyst structure and performance for Fischer-Tropsch synthesis were studied. The pore size of the two series of catalysts increased as the aspect ratio of the alumina nanofiber increased. For impregnated catalysts, large Co3O4 particles were formed on the external surface of the alumina support when the aspect ratio was 3 and 5, while the crystallite sizes of Co3O4 increased from 13.3 nm to 15.6 nm with the increase of the aspect ratio from 7 to 16. The four 'rearranged' catalysts possessed similar and homogeneously dispersed Co3O4 crystallites of 9.5 nm. As expected the reduction behavior of the two series of catalysts was primarily influenced by the Co3O4 crystallite size and structure. The FT data of the two series of catalysts indicate that dispersed Co catalysts on alumina nanofibers with large aspect ratios having large inter-crystallite pores significantly improve the catalyst activity and C5+ selectivity. The FT data of the 'rearranged' catalysts strongly demonstrated that the internal mass transfer of reactants and products increased with a decrease in inter-crystallite pore size, resulting in a decrease of C5+ selectivity and C3 olefin/paraffin ratio, and an increase of CH4 selectively, while the CO consumption rate was little altered. Furthermore, catalytic stability tests showed that the alumina nanofibers with larger aspect ratios inhibited Co migration and coalescence in the matrices of the nanofibrous alumina, and this significantly enhanced the stability of the catalyst. The Cop/Al2O3-16 catalyst possessing uniformly distributed cobalt, improved reducibility and large pores is the preferred choice to generate high catalytic activity, stability and C5+ selectivity.

Size-controlled Synthesis of Hematite -Fe2o3 Nanodisks Closed with (0001) Basal Facets and {11-20} Side Facets and Their Catalytic Performance for CO2 Hydrogenation

Enhanced Catalytic Activity of Α-Fe2o3 Nanorods Enclosed with {110} and {001} Planes for Methane Combustion and CO Oxidation

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Core-alloyed Shell Structured Fe@FeCo Di-Atomic Nanoclusters Loaded in Carbon Aerogels As Efficient Bi-Functional Catalysts Towards ORR and HER

Crystal Plane Effect of Fe2o3 with Various Morphologies on Co Catalytic Oxidation

Nanocrystalline Iron–boron Catalysts for Low-Temperature CO Hydrogenation: Selective Liquid Fuel Production and Structure–activity Correlation

Facet-Controlled Cu-doped and K-promoted Fe2O3 nanosheets for efficient CO2 hydrogenation to liquid hydrocarbons

Enhancing CO 2 hydrogenation performance via the synergistic effects of iron carbides and iron oxides

Influence of hematite morphology on the CO oxidation performance of Au/α-Fe2O3

Design and Construction of Size-Controlled CoO/CS Catalysts for Fischer-Tropsch Synthesis

The Effect of the Nanofibrous Al2O3 Aspect Ratio on Fischer-Tropsch Synthesis over Cobalt Catalysts.

Monodisperse and Size-Tunable CoO Nanocrystals Synthesized by Thermal Decomposition and As an Active Precursor for Fischer-Tropsch Synthesis

Nanocrystalline Ferrihydrite-Based Catalysts for Fischer-Tropsch Synthesis: Part I. Reduction and Carburization Behavior

An Efficient Catalyst Derived from Carboxylated Lignin-Anchored Iron Nanoparticle Compounds for Carbon Monoxide Hydrogenation Application

Selectivity control between reverse water-gas shift and fischer-tropsch synthesis in carbon-supported iron-based catalysts for CO 2 hydrogenation

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Uniformity Dispersive, Anti-Coking Core@double-Shell-structured Co@SiO2@C: Effect of Graphitic Carbon Modified Interior Pore-Walls on C5+ Selectivity in Fischer-Tropsch Synthesis

Surface Coordinate Geometry of Iron Catalysts: Hydrogenation of CO2 over Fe/TiO2 Prepared by a Novel Method

Fabrication of Transition Metal (Mn, Co, Ni, Cu)‐Embedded Faveolate ZnFe2O4 Spinel Structure with Robust CO2 Hydrogenation into Value‐added C2+ Hydrocarbons

Unravelling the atomistic mechanisms underpinning the morphological evolution of Al-alloyed hematite

Highly Efficient Nano-octahedral Au/γ-Fe2O3 Catalyst Synthesized by Dealloying Combined with Calcination for Low-Temperature CO Oxidation