Selective production of light α-olefins and long-chain α-olefins from CO2/H2 and CO/H2 over iron-based catalysts: Effects of Na2S and H2O

Yufeng Li,Jiayang Chen,Zhangshi Li,Jie Chen,Yuxin Wang,Yuebing Xu,Bing Liu,Yang Jiao,Xiaohao Liu
DOI: https://doi.org/10.1016/j.jcat.2024.115587
IF: 7.3
2024-08-01
Journal of Catalysis
Abstract:Conversion of CO2/H2 and CO/H2 into α-olefins via Fischer-Tropsch synthesis (FTS) reaction has stimulated great interest. Herein, iron-based catalysts were developed to produce α-olefins with a tailor-made manner. As-synthesized 1.5Na-Fe1Zn1 exhibited high activity for CO2 conversion, high selectivity toward C2-C5 light olefins along with stable 1000 h run. Separate catalytic cracking of C5+ products over ZSM-5 nanosheet promoted light olefins selectivity up to 64.6 %, benefiting from the elimination of hydrogenation reaction. Interestingly, Na2S showed different effects in CO2-FTS and CO-FTS over iron-based catalysts. In detail, Na2S significantly suppressed catalytic activity and increased selectivity toward alkanes/CO in CO2-FTS reaction. However, it can surprisingly improve catalyst stability in CO-FTS reaction, leading to high activity at about 96 % CO conversion and high selectivity to long-chain C4+ olefins at about 65.4 %. In addition, it was demonstrated that H2O accumulation hindered H2/CO adsorption and dissociation, subsequent hydrogenation into CHx, and their carbon–carbon coupling, which resulted in catalyst deactivation and selectivity shifting toward CH4 and CO in atmospheric pressure CO2-FTS reaction.
chemistry, physical,engineering, chemical
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to improve the selectivity and stability of light α - olefins (C2 - C5) and long - chain α - olefins in the process of converting CO2/H2 and CO/H2 into α - olefins through iron - based catalysts. Specifically, the research focuses on the following points: 1. **Catalyst performance optimization**: By introducing different promoters (such as Na2S and H2O), study their different effects on the activity, selectivity and stability of iron - based catalysts in CO2 and CO hydrogenation reactions. In particular, the different roles of Na2S in CO2 - FTS and CO - FTS reactions, as well as the influence of H2O on the evolution of the catalyst active phase and product selectivity are studied. 2. **Improvement of the selectivity of light α - olefins**: By using ZSM - 5 nanosheets to separate catalytic cracking C5+ products, the selectivity of light α - olefins is significantly improved while avoiding the formation of unwanted methane and other light alkanes. 3. **Catalyst stability**: Explore how to improve the stability of the catalyst by adjusting the adsorption and activation of CO2 and CO and controlling the carbon deposition rate, especially in the production of high - value long - chain α - olefins in the CO - FTS reaction. 4. **The influence of water**: The negative effect of H2O in the CO2 - FTS reaction is studied, and a simple hydrophobic strategy is proposed to reduce the adverse effects of water on the catalyst stability and product selectivity. ### Formula summary - **CO2 conversion rate (XCO2)**: \[ X_{\text{CO2}}=\left(\frac{(A_{\text{CO2}})_{\text{in}}/(A_{\text{N2}})_{\text{in}}-(A_{\text{CO2}})_{\text{out}}/(A_{\text{N2}})_{\text{out}}}{(A_{\text{CO2}})_{\text{in}}/(A_{\text{N2}})_{\text{in}}}\right)\times100\% \] - **Product selectivity (S)**: \[ S_{\text{CO}}=\left(\frac{f_{\text{CO}}A_{\text{CO}}/(A_{\text{N2}})_{\text{out}}}{f_{\text{CO2}}\left[(A_{\text{CO2}})_{\text{in}}/(A_{\text{N2}})_{\text{in}}-(A_{\text{CO2}})_{\text{out}}/(A_{\text{N2}})_{\text{out}}\right]}\right)\times100\% \] \[ S_{\text{CH4}}=\left(\frac{f_{\text{CH4}}A_{\text{CH4}}/(A_{\text{N2}})_{\text{out}}}{f_{\text{CO2}}\left[(A_{\text{CO2}})_{\text{in}}/(A_{\text{N2}})_{\text{in}}-(A_{\text{CO2}})_{\text{out}}/(A_{\text{N2}})_{\text{out}}\right]}\right)\times100\% \] \[ S_{\text{C2 = C4 =}}=\left(\frac{A_{\text{C2 =}}+A_{\text{C3 =}}+A_{\text{C4 =}}}{A_{\text{CH4}}}\right)\times100\% \] \[ S_{\text{C5+}} = 100\% - S_{\text{CH4}} - S_{\text{...}}