Abstract:The effects of the cobalt particle size in the range of 6.5–26.3 nm on the catalyst structural transformation and methane selectivity evolution in Fischer–Tropsch synthesis (FTS) have been investigated. In situ X-ray diffraction experiments revealed that cobalt was maintained as CoO under a reaction environment when initial Co3O4 particles on SiO2 were below 8.4 nm. The large metallic Co particles can keep a stable size and phase state, indicating almost unchanged catalytic activity and methane selectivity. In contrast, small metallic Co or CoO particles show a gradual increase in methane selectivity with time on stream. Stable large metallic Co particles can be explained as the dominant surface high-coordinated Co atoms having a weak binding ability for H2O molecules, which are more difficult to be oxidized into CoO. It is believed that CoO rather than metallic Co atoms could interact with Si-OH groups to form inactive cobalt silicate (Co2SiO4), which leads to a higher methane selectivity and drives a decrease in the particle size during the FTS reaction. ZrO2 as a structural promoter highly dispersed on SiO2 was found to give a milder increase in methane selectivity due to fewer chances of Si-OH interacting with CoO species. Density functional theory (DFT) calculations combined with CO temperature-programmed desorption (CO-TPD), NH3-TPD, CO2-TPD, and Py-IR demonstrate that Co/ZrO2 interfacial sites play a crucial role in enhancing the catalytic activity as the electron accumulation in the interface region not only increases the CO adsorption amount but also promotes the CO dissociation on cobalt sites. At the same time, a higher surface C*/H concentration benefits a lower methane selectivity. ZrO2, which acts as a Lewis acid, can adsorb CO molecules abundantly but weakly by the interaction between Zr4+ cations and O atoms in CO. Especially, for the 15Co(C)/Q15 catalyst with initial CoO particles on SiO2, methane selectivity rapidly increases at an early reaction stage, which originates from easier accessible CoO reacting with Si-OH groups. In addition, both 15Co(C)/Q15 and 15Co(C)/10Zr(I)-Q15 catalysts show the dominant CoO phase, which is active in the FTS reaction. Indeed, the DFT calculations demonstrate that CO activation on the CoO(200) surface via the H-assisted CH2O dissociation pathway exhibits a lower activation energy of 1.21 eV compared to that on the face-centered cubic (fcc) Co(111) surface with an activation energy of 1.42 eV, despite that direct CO dissociation, CHO dissociation, and CHOH dissociation on CoO(200) show higher activation energies. This study provides a prime scientific understanding about regulating catalytic activity and methane selectivity.

The influence of hierarchical zeolite composition and pore structure on behavior of cobalt-based Fischer–Tropsch synthesis catalysts

Synthesis and Physicochemical Characterization of Hierarchical ZSM-5: Effect of Organosilanes on the Catalyst Properties and Performance in the Catalytic Fast Pyrolysis of Biomass

Cobalt nanoparticles confined in silica networks with 3D hierarchical porous features for Fischer–Tropsch synthesis

Co-Based Catalysts Supported on Silica and Carbon Materials: Effect of Support Property on Cobalt Species and Fischer–Tropsch Synthesis Performance

Effect of the desilication of H-ZSM-5 by alkali treatment on the catalytic performance in Fischer–Tropsch synthesis

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

Particle-Size-Dependent Methane Selectivity Evolution in Cobalt-Based Fischer–Tropsch Synthesis

The effect of hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios on its pore structure and catalytic performance

Modulating Fischer-Tropsch synthesis performance on the Co3O4@SixAly catalysts by tuning metal-support interaction and acidity

Hierarchical ZSM-5 Supported CoMn Catalyst for the Production of Middle Distillate from Syngas

The study of Pt/zeolites for CO oxidation: Effects of skeleton structure and Si/Al ratio

The effects of promoters of K and Zr on the mesoporous carbon supported cobalt catalysts for Fischer-Tropsch synthesis.

Controllable synthesis of core-shell Co@C@SiO2 catalysts for enhancing product selectivity in Fischer-Tropsch synthesis by tuning the mass transfer resistance

Insight into the Influence of the Graphite Layer and Cobalt Crystalline on a ZIF-67-Derived Catalyst for Fischer–Tropsch Synthesis

Effect of Shell Thickness on Skeletal Fe@HZSM-5 Core-Shell Catalysts for Fischer-Tropsch Synthesis

Microcalorimetric adsorption studies of highly loaded Co-ZrO 2/SiO2 catalysts for Fischer-Tropsch synthesis

Identify Zr Promotion Effects in Atomic Scale for Co-Based Catalysts in Fischer–Tropsch Synthesis

Uniformity Dispersive, Anti-Coking Core@double-Shell-structured Co@SiO2@C: Effect of Graphitic Carbon Modified Interior Pore-Walls on C5+ Selectivity in Fischer-Tropsch Synthesis

Synthesis of mesoporous molecular sieves and their application as supports for catalysts in F-T synthesis

Fischer–Tropsch synthesis: Pore size and Zr promotional effects on the activity and selectivity of 25%Co/Al 2 O 3 catalysts