Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Materials with lightweight construction, high strength and wear resistance are preferred in the automotive sector and aluminium is found to be a natural choice for the manufacturers. In this work, Al7075 hybrid metal matrix composites enhanced with SiC (6% weight fraction) and TiB2 (2%–6% weight fraction) particles were fabricated by stir casting technique. The characterisation of internal structure of the developed composites was done by subjecting them to scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). It was found that the reinforced particles were uniformly distributed in the aluminium matrix alloy, and only a few clusters were found in the matrix alloyed with 6% TiB2. The tensile strength, hardness and flexural strength of the hybrid composites increased with increase in the weight percentage of reinforcements and attained a maximum of 233.34 MPa, 220 Hv and 458 MPa, respectively, when reinforced with a maximum of 6% SiC and 6% TiB2. The elongation percentage and the impact strength of the hybrid composites start to decrease with an increase in reinforcement percentage and attained a minimum of 6.74% and 1.2 J, respectively, when reinforced with a maximum of 6% SiC and 6% TiB2. By adjusting the input parameters such as load, sliding speed, and sliding distance, the sliding wear behaviour of the hybrid metal matrix composites was explored. It was discovered that the wear rates and coefficient of friction of the hybrid composites decreased with an increase in reinforcement percent. As a result of exhibiting superior mechanical and tribological capabilities, the results show that Al7075 with 6 wt.% SiC and 6 wt.% TiB2 hybrid composite performs the best over all other hybrid composites.

Semisolid stir processing of AZ91/TiO2 nanocomposite analysis with SiC exposure: behaviour measures

Silicon carbide nanoparticles featured AZ63/BN alloy nanocomposite made by using liquid stir vacuum die cast: characteristics study

Silicon Carbide Particle Enriched Magnesium Alloy (AZ91) Composite: Physical, Microstructural and Mechanical Studies

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

SiC Blending Behaviour of Hybrid AZ31 Alloy Nanocomposite: Metallographic and Mechanical Studies

Effect of SiC Nanoparticles on AZ31 Magnesium Alloy

AZ91D/TiB2 Nanocomposites Fabricated by Solidification Nanoprocessing

Microstructure and Mechanical Properties of Hybrid AZ91 Magnesium Matrix Composite with Ti and SiC Particles

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

Silicon carbide-embedded AZ91E alloy nanocomposite hybridised with chopped basalt fibre: performance measures

Tribological behavior of SiC reinforced AZ91D composites manufactured by semisolid injection molding

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route

Hybrid Filler Actions on Functional Performance Evaluation of Magnesium Alloy (AZ61) Hybrid Nanocomposites

Study of Microstructural and Mechanical Properties of Al/SiC/TiO2 Hybrid Nanocomposites Developed by Microwave Sintering

Improvement of mechanical performance on zirconium dioxide nanoparticle synthesized magnesium alloy nano composite

Development of high-performance aluminium 6061/SiC nanocomposites by ultrasonic aided rheo-squeeze casting method

Synthesis and Characterization of Mg-Al-Zn Alloy-Based Bimodal Hybrid Composites with SiC and TiO2

Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique

Synthesis of Nanocrystalline AZ91 Magnesium Alloy Dispersed with 15 vol.% Submicron SiC Particles by Mechanical Milling

Mechanical Properties and Microstrutures of Nano-Sized Sic Particles Reinforced Az91d Nanocomposites Fabricated by High Intensity Ultrasonic Assisted Casting

Mechanical Test on Aluminum Alloy with Maximal Soluble SiC Reinforcement