Abstract:This study focuses on the effects of a hybrid reinforcement consisting of nanosized particles of Palm Sprout Shell Ash (PSSA) and silicon carbide (SiC) on the mechanical and tribological properties of the Al-Cu-Mg alloy. Hybrid reinforced composites with different weight percentages of SiC and PSSA (0:0, 0:4, 1:3, 2:2, and 4:0 wt.%) were prepared using the ultrasonic-assisted bottom-poured stir casting technique. SEM and EDS were used to characterize the hybrid composite made of Al-Cu-Mg alloy. Optical and SEM microstructural analyses demonstrated an even distribution of SiC and PSSA nano-reinforcements within the matrix. EDS analysis revealed SiC and PSSA reinforcement in the matrix. The mechanical properties (tensile, flexural, and impact strength) and wear properties of the composites and alloy were evaluated according to the ASTM standards. The hybrid reinforced composites displayed remarkable results compared with the base alloy. Among all composites, the 2:2 wt.% SIC and PSSA hybrid reinforced composite exhibited a significant enhancement in both tensile strength and flexural strength, with a 29.15% increase in tensile strength and a 27.64% increase in flexural strength. However, the inclusion of these reinforcements led to a declined in ductility and impact strength of the Al-Cu-Mg alloy composite. Maximum reductions in ductility and impact strength were observed in the 0:4 wt.% SiC and PSSA-reinforced composites, with decreases of 47.67% and 3.56%, respectively. For the 2:2 wt.% SiC and PSSA composites, these reductions were 23.64% and 3.16%, respectively. The SEM analysis of the fractured surfaces of the composites tested for the mechanical properties revealed evidence of both ductile and brittle fracture mechanisms in the tensile, flexural, and impact tests. The wear behaviour of the prepared samples was evaluated, and all composites exhibited superior performance compared with the base alloy, demonstrating adhesive and abrasive wear mechanisms and varying coefficients of friction.

SiC Blending Behaviour of Hybrid AZ31 Alloy Nanocomposite: Metallographic and Mechanical Studies

Effect of SiC Nanoparticles on AZ31 Magnesium Alloy

Silicon carbide nanoparticles featured AZ63/BN alloy nanocomposite made by using liquid stir vacuum die cast: characteristics study

Silicon carbide-embedded AZ91E alloy nanocomposite hybridised with chopped basalt fibre: performance measures

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route

Silicon Carbide Particle Enriched Magnesium Alloy (AZ91) Composite: Physical, Microstructural and Mechanical Studies

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Hybrid Filler Actions on Functional Performance Evaluation of Magnesium Alloy (AZ61) Hybrid Nanocomposites

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Microstructure Evaluation, Quantitative Phase Analysis, Strengthening Mechanism and Influence of Hybrid Reinforcements (β-SiCp, Bi and Sb) on the Collective Mechanical Properties of the AZ91 Magnesium Matrix

A Study On The Effects Of Hybrid (Sic- Pssa) Nano Sized Reinforcement On Mechanical And Tribological Behaviour Of Al Alloy-Based Metal Matrix Composite Produced By Ultrasonic Assisted Stir Casting

Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite

Effects of Hybrid SiCp on the Microstructures and Mechanical Properties of AZ31B Alloy

Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites

Implications of SiC/Al2O3 Reinforced Al-Mg-Zn Alloy Hybrid Nano Composites Using Vacuum Sintering Method

Influence of silicon nitride (Si3N4) reinforcement on mechanical properties and wear behaviour of AZ31–Nano alumina (Al2O3) composites developed through the stir casting route

Semisolid stir processing of AZ91/TiO2 nanocomposite analysis with SiC exposure: behaviour measures

Fabrication, Microstructure, and Mechanical Properties of AZ31/Silicon Carbide/Graphite Teinforced Hybrid Composites

Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates As Reinforcement

Microstructure, mechanical properties and wear behavior of Mg matrix composites reinforced with Ti and nano SiC particles

Mechanical and wear behavior of Al 7075/Al2O3/SiC/mg metal matrix nanocomposite by liquid state process