Abstract:Novel nanocomposites based on an AZ91 magnesium alloy matrix reinforced with a hybrid mixture of SiC and TiC nanoparticles with different nanoparticle contents (0.5% and 1%, by mass fraction) were fabricated by semi-solid stirring followed by ultrasonic vibration. Microstructural analysis indicated that the hybrid nanoparticles were uniformly distributed in the nanocomposite. The morphology of the Mg17Al12-based eutectic phase changed from plate-like, in the as-cast AZ91 alloy, to lamellar in the as-cast nanocomposites. The tensile strength and micro-hardness of the nanocomposites were improved by increasing the fraction of nanoparticles in the composite. Following extrusion, the matrix grains in the nanocomposite were significantly refined. The extent of the grain refinement increased at higher mass fractions of the nanoparticle. This refinement was not only due to dynamic recrystallization, but also the synergistic pinning effects arising from both the externally added nanoparticles as well as dynamically precipitated Mg17Al12 particles. The nanoparticle additions led to increases in yield strength (YS), ultimate tensile strength (UTS) and elongation to failure (EL). The increase in YS was mostly attributed to the effects of grain refinement, with additional contributions from the influence of Orowan strengthening and thermal expansion effects. The values of both the work hardening rate (θ) and strain hardening exponent (n) increased with increasing fraction of nanoparticles. The high θ value in stage III was attributed to both grain refinement and weakening of the basal plane texture, while the high n value was mainly related to the increase in resistance to dislocation movement caused by pinning effects of the nanoparticles.

Effect of SiC Nanoparticles on AZ31 Magnesium Alloy

Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites

Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates As Reinforcement

SiC Blending Behaviour of Hybrid AZ31 Alloy Nanocomposite: Metallographic and Mechanical Studies

Effect of Micro- and Nano-SiC Particulate Reinforcements in Magnesium-Based Metal Matrix Composites

Preparation and properties of nano-sized SiC particles reinforced AZ91D magnesium matrix composites

Effect of submicron size SiC particles on microstructure and mechanical properties of AZ31B magnesium matrix composites

Mechanical Properties and Microstrutures of Nano-Sized Sic Particles Reinforced Az91d Nanocomposites Fabricated by High Intensity Ultrasonic Assisted Casting

The Effect of Micro-SiCp Content on the Tensile and Fatigue Behavior of AZ61 Magnesium Alloy Matrix Composites

Silicon Carbide Particle Enriched Magnesium Alloy (AZ91) Composite: Physical, Microstructural and Mechanical Studies

Effects of Hybrid SiCp on the Microstructures and Mechanical Properties of AZ31B Alloy

Microstructural Modification and Strength Enhancement by SiC Nanoparticles in AZ31 Magnesium Alloy During Hot Rolling

Silicon carbide-embedded AZ91E alloy nanocomposite hybridised with chopped basalt fibre: performance measures

Characteristics and Mechanical Properties of Magnesium Matrix Composites Reinforced with Micron/submicron/nano SiC Particles

Effects of (micron+submicron+nano) Multisized SiC Particles on Microstructure and Mechanical Properties of Magnesium Matrix Composites

Microstructural Analysis and Mechanical Properties of the Az31B Matrix Cast Composites Containing Micron SiC Particles

Effect of SiC on Microstructure and Mechanical Properties of Nano-SiC/Mg-8Al-1Sn Composites

Effects of Sb Addition on the Microstructure and Mechanical Properties of Az91 Magnesium Alloy

Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite

Microstructure And Mechanical Properties Of Al-Sic Nanocomposites Synthesized By Surface-Modified Aluminium Powder

Fabrication of SiC Particles-Reinforced Magnesium Matrix Composite by Ultrasonic Vibration