Abstract:This paper discusses a nanometer level precision alignment technique as applied to highly efficient micro optics packaging using heat curable adhesives. To achieve a fast curing process, we deposit microwave energy to the spot where optical bonding is desired. Conventional microwave heating technique, however, as we know it, relies on large mass ratio between the epoxy and the components to be bonded. In order to improve the efficiency of heat absorption by the tiny amount of adhesive used for micro optics packaging, we pre-process the components to be bonded, by first polishing the bonding surfaces and then depositing a very thin layer of metalized film on them. An infrared (IR) remote temperature sensor is utilized to monitor the temperature of the adhesive (to prevent over heating). An automated system can then adjust the power output of the microwave so that a fairly constant curing temperature can be maintained. During the fast curing process, pre-alignment of micro optics, such as fiber optic coupler, will inevitably suffer minor misalignment due to non-uniform heating of the components. To compensate for this side-effect, we have developed a real time alignment monitoring and feedback controlled system. As an example to packaging fiber couplers, such a system can monitor the insertion loss (IL) of a component in real time while the adhesive is being cured by the microwave energy. A 3-dimensional piezo-electric transducer (PZT) is employed to achieve the x-, y-, and z-axis alignment. A level of 10 nanometer alignment can be readily achieved which in turn leads to an IL sensitivity of as small as 0.004dB. An improvement of a packaging efficiency as high as 150 times has been demonstrated, compared to conventional blind oven curing process. Yield of micro optics packaging is also expected to increase due to the use of real time alignment process.

A Novel Packaging Method for Stable Microsphere Coupling System

Packaging and isolating microsphere coupling system

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Enhancing the Robustness of the Microcavity Coupling System

Robust Spot-Packaged Microsphere-Taper Coupling Structure For In-Line Optical Sensors

Packaged Silica Microsphere-Taper Coupling System for Robust Thermal Sensing Application.

A Stable Frequency References Platform Based on Packaged Microsphere-Taper Coupling System.

Eliminating the external libration sound for the optical microsphere-taper coupling structure

Development of Structure-tailored and Composite Magnetic-Fluorescent Microspheres Through the PRI Method

Robust Packaged Fiber-Microcavity Device with over One Billion Q-factor

Effect of Vibration Noise on the High-Q Optical Microcavity Coupling System and It's Suppression Methods

A New Route for Fabricating Polymer Optical Microcavities.

Humidity and particulate testing of a high-Q microcavity packaging comprising a UV-curable polymer and tapered fiber coupler

Package Technology for Microcavities

Micro Optics Alignment with Nanometer Precision and Real-Time Bonding Using Microwave Technology

Observation of high-Q optomechanical modes in the mounted silica microspheres

Mode Coupling Strength in A Microsphere Cavity Coupled with Fiber Taper

Single-mode Fiber Auto-Coupling System with Wedges

Cryogenic packaging of nanophotonic devices with a low coupling loss < 1 dB

Packaged Optofluidic Microbubble Resonators for Optical Sensing

A low temperature, non-aggressive wafer level hermetic package with UV cured SU8 bond