Abstract:Heterogeneous and monolithic integration of the versatile low loss silicon nitride platform with low temperature materials such as silicon electronics and photonics, III-V compound semiconductors, lithium niobate, organics, and glasses, has been inhibited by the need for high temperature annealing as well as the need for different process flows for thin and thick waveguides. New techniques are needed to maintain the state-of-the-art losses, nonlinear properties, and CMOS compatible processes while enabling this next generation of 3D silicon nitride integration. We report a significant advance in silicon nitride integrated photonics, demonstrating the lowest losses to date for an anneal-free process at a maximum temperature of 250 C, with the same deuterated silane based fabrication flow, for nitride and oxide, for an order of magnitude range in nitride thickness without requiring stress mitigation or polishing. We report record low losses for anneal-free nitride core and oxide cladding, enabling 1.77 dB/m loss and 14.9 million Q for 80 nm nitride core waveguides, more than half an order magnitude lower loss than previously reported 270 C processes, and 8.66 dB/m loss and 4.03 million Q for 800 nm thick nitride. We demonstrate laser stabilization with over 4 orders of magnitude frequency noise reduction using a thin nitride reference cavity. And using a thick nitride micro-resonator, we demonstrate parametric gain and Optical Parametric Oscillation (OPO) with the lowest reported OPO threshold per unit resonator length for low temperature fabricated nitride, and supercontinuum generation over two octaves. These results represent a significant step towards a uniform ultra-low loss silicon nitride homogeneous and heterogeneous platform for both thin and thick waveguides capable of linear and nonlinear photonic circuits and integration with low temperature materials and processes.

Cryogenic packaging of nanophotonic devices with a low coupling loss < 1 dB

Cryogenic Optical Packaging Using Photonic Wire Bonds

Cryogenic and hermetically sealed packaging of photonic chips for optomechanics

Packaged Cryogenic Photon Pair Source Using an Effective Packaging Methodology for Cryogenic Integrated Optics

A rigid, low-loss fiber-optic coupler for cryogenic photonics

Cryogenic Optical-to-Microwave Conversion Using Si Photonic Integrated Circuit Ge Photodiodes

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

Fiber to Chip Fusion Splicing for Robust, Low Loss Photonic Packaging

Non-volatile Tuning of Cryogenic Optical Resonators

Cryogenic Photonic Readout Based on Thin-Film Lithium Niobate Mach–Zehnder Modulators

Anneal-free ultra-low loss silicon nitride integrated photonics

Cryogenic operation of silicon photonic modulators based on DC Kerr effect

Low Loss Chip‐to‐Chip Couplers for High‐Density Co‐Packaged Optics

300-Nm-thick, Ultralow-Loss Silicon Nitride Photonic Integrated Circuits by 8-In. Foundry Production

Scalable and efficient grating couplers on low-index photonic platforms enabled by cryogenic deep silicon etching

A Theoretical Sub-0.1 Db Loss Single Mode Fiber-To-Chip Edge Coupler for Silicon Nitride Waveguides

Cryogenic electro-optic interconnect for superconducting devices

Single-photon detection and cryogenic reconfigurability in lithium niobate nanophotonic circuits

Free-form micro-optics enabling ultra-broadband low-loss fiber-to-chip coupling