Abstract:Low carbon steel plays an important role in many applications due to its high strength. Its high strength comes from the strengthening effect of nano-Cu-rich phase precipitates. In order to effectively adjust the microstructure of Cu-rich phase precipitates and obtain Fe-Cu-based steel with the best properties by adding different alloying elements (Mn, Al), it is necessary to understand the precipitation process of Cu particles. In this paper, based on the Ginzburg-Landau theory, the previous phase field model is modified, and the continuous phase field method is used to simulate the precipitation mechanism of nanometer Cu-rich precipitates and the inhibiting of the effect of Al content on Cu-rich precipitates of Fe-15%Cu-3%Mn- x Al ( x = 1%, 3%, 5% mass fraction) alloy at 873 K isothermal aging. Combining with the free energy derived from thermodynamics database, the microstructure evolution corresponds to the real alloy system. By calculating the composition field variables and structural order parameters, the evolution of phase separation and precipitated phase morphology in aging process are simulated. Moreover, the influence law of morphology, quantity density, average particle radius, growth and coarsening of Cu-rich precipitated phase are discussed. The results show that in the early stage of aging process, the nano-Cu-rich phase precipitates through the spinodal decomposition mechanism, and is randomly distributed in the iron matrix. Furthermore, due to the difference in atomic diffusion rate, the core-shell structure with Cu-rich phase as a core is formed. With the aging time extending, the structure of Cu-rich phase precipitates changes from bcc to fcc. Because of the synergistic effect between Al and Cu, the diffusion of Cu is slowed down. Besides, with the Al and Mn atoms precipitating, Al/Mn clusters are segregated around the Cu-rich precipitates, forming the Al/Mn intermetallic core-shell structure, and gradually wrapping the Cu-rich phase uniformly. During the evolution of the precipitation stage, the Al/Mn clusters are isolated around the Cu-rich precipitation phase, forming a gradually uniform Al/Mn intermetallic phase core shell structure covering the Cu-rich phase, which is to hinder the buffer layer from forming in the precipitation stage of the reservoir. In addition, with the Al content increasing, the Al/Mn intermetallic phase promotes the growth of the buffer layer and hinders the Cu-rich precipitate phase from growing and coarsening.

Self-Formation Of Nanocomposite Cu/Al2o3 Thin Films On Cual Dilute Alloys By Annealing In Inert Atmospheres

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

Nanostructured Composite Obtained by Mechanically Driven Reduction Reaction of Cuo and Al Powder Mixture

The Surface Condition Effect of Cu2O Flower/grass-Like Nanoarchitectures Grown on Cu Foil and Cu Film

Study on self-formed regular Copper and Aluminum particles on the surface of annealed Cu (Al)-Zr alloyed films

Uncovering the influence of Cu on the thickening and strength of the δ′/θ′/δ′ nano-composite precipitate in Al–Cu–Li alloys

Surface alloying and pinhole formation in ultra-thin Fe/Cu(100) films

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

On the Evolution of Nano-Structures at the Al–Cu Interface and the Influence of Annealing Temperature on the Interfacial Strength

Phase field study of effect of Al on Cu-rich precipitates in Fe-Cu-Mn-Al alloys

Nano-Scale Surface Morphology Evolution of Cu/Ti Thin Films

Molecular dynamics investigation of deposition and annealing behaviors of Cu atoms onto Cu(0 0 1) substrate

Interfacial chemistry in Al/CuO reactive nanomaterial and its role in exothermic reaction

Molecular dynamics investigation of deposition and annealing behaviors of Cu atoms onto Cu(001) substrate

Interfacial and Microstructural Changes of the Al2O3/ZnO Multilayer Films Induced by In-Situ Growth and Post-Annealing Temperatures

Structural evolution of Ag-Cu nano-alloys confined between AlN nano-layers upon fast heating

Au‐Cu Alloy Formation on Cubic Cu2O Nanocrystals at Ambient Temperature and Their Catalytic Performance

Regulating the interfacial reaction between carbon nanotubes and aluminum via copper nano decoration

Mechanical Properties of Thermally Annealed Cu/Ni and Cu/Al Multilayer Thin Films: Solid Solution vs. Intermetallic Strengthening

Alloying In An Immiscible Cu-Nb System Upon Solid-State Reaction

Evaporated CuAl Amorphous Alloys and Their Phase Transition