Abstract:Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser process parameters, including laser power density and scanning rate. Adjusting the parameters to input the appropriate heat, so that the high quality graphene can be obtained in an optimal condition. The influence of carbon source on graphene growth was also investigated. Ultimately, the penetration and precipitation mechanism of carbon into Ni substrate during the fabrication process were also discussed. This approach may reach the scale large enough for practical applications.Graphene is a promising material for many potential applications, owing to its extraordinary properties. Numerous synthesizing approaches have been developed to realize the promising applications of graphene. However, there is lack of a comprehensive way, which combines the following features, i.e. large-area growth, patterned graphene and fast growth at the same time. Here, we provide an engineering approach to both large-area and patterned graphene at a high rate. The high power and continuous-wave lasers were employed to irradiate solid carbon source coated on nickel surface. The rate of graphene production by laser irradiation exceeds 28.8 cm2/min and the solid carbon source is less hazardous compared to typical gaseous carbon sources used in chemical vapor deposition (CVD). The influence of laser process on graphene fabrication was investigated systematically. Raman analyses, optical images and scanning electron microscopy (SEM) results show that the quality of graphene strongly depends on the laser ...

Fast Growth Of Graphene Patterns By Laser Direct Writing

Laser Direct Writing of Graphene Patterns

Laser Direct Writing Graphene Patterns on Sio2/Si Substrates

Laser Direct Writing of Graphene Nanostructures Beyond the Diffraction Limit by Graphene Oxidation

Multi-Scale Graphene Patterns on Arbitrary Substrates Via Laser-Assisted Transfer-Printing Process

Direct Writing of Graphene Patterns on Insulating Substrates under Ambient Conditions.

Structured Graphene Fabricated by Laser Direct Writing Beyond the Diffraction Limit

Direct Laser Fabrication of Large-Area Graphene: an Engineering Approach to Nano-Materials

Transparent Interconnections Formed by Rapid Single-Step Fabrication of Graphene Patterns

Graphene synthesis by laser-assisted chemical vapor deposition on Ni plate and the effect of process parameters on uniform graphene growth

Direct Laser Fabrication of Large-Area and Patterned Graphene at Room Temperature

Direct Patterning on Reduced Graphene Oxide Nanosheets Using Femtosecond Laser Pulses

Highly Efficient Laser Bidirectional Graphene Printing: Integration of Synthesis, Transfer and Patterning

Tunable Graphene Oxide Reduction and Graphene Patterning at Room Temperature on Arbitrary Substrates

Direct Imprinting of Microcircuits on Graphene Oxides Film by Femtosecond Laser Reduction

Laser-induced direct graphene patterning and simultaneous transferring method for graphene sensor platform.

Rapid Growth Mechanism of Graphene Fabricated by High-Power Laser Irradiation

Laser Controllable Growth of Graphene Via Ni-Cu Alloy Composition Modulation

Fast Patterned Graphene Ribbons Via Soft–lithography

Fast growth of large single-crystalline graphene assisted by sequential double oxygen passivation

Laser Writing Block Copolymer Self-Assembly on Graphene Light-Absorbing Layer