Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

High cycle fatigue of Ti-600 alloy

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Fracture mechanism of Ti60 alloy at high temperature in very high cycle fatigue regime and fatigue life prediction

Ultra-High Cycle Fatigue Behavior of Ti-6al-4v Alloy

Fatigue behavior of H-6A1-4V alloy in very high cycle regime

Crack Initiation Mechanism in a High-Strength Ti-5Al-7.5V Alloy Subjected to High Cycle Fatigue Loading

High Cycle Fatigue in Ti-6Al-4V Titanium Alloy

Very high‐cycle fatigue behaviour of Ti‐6Al‐4V alloy under corrosive environment

High cycle fatigue behavior of implant Ti-6Al-4V in air and simulated body fluid

Fatigue failure mechanism of Ti60 titanium alloy in HCF and VHCF regime at different temperatures

Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy

Fatigue Crack-Initiation Mechanisms of a Dual-Phase Titanium Alloy Exhibiting High Tensile and High-Cycle Fatigue Properties

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

High cycle fatigue behavior of additively manufactured Ti-6Al-4V alloy with HIP treatment at elevated temperatures

Frequency and stress ratio effects in high cycle fatigue of Ti-6Al-4V

Fatigue Behavior of Titanium Alloy Ti-4Al-2V under High Cycle Loading at Elevated Temperature

Remarkable High-Cycle Fatigue Resistance of the TiZrNbHfTa High-Entropy Alloy and Associated Mechanisms

High‐cycle and Very‐high‐cycle Fatigue Behavior at Two Stress Ratios of Ti‐6Al‐4V Manufactured Via Laser Powder Bed Fusion with Different Surface States

Combined high and low cycle fatigue analysis of FGH96 alloy under high temperature conditions

Dwell and Normal Cyclic Fatigue Behaviours of Ti60 Alloy