Abstract:Fatigue crack initiation mechanism at high cycle regime in a bimodal Ti-5Al-7.5V alloy are investigated by fracture observations, focused-ion-beam cross-section and electron back-scattered diffraction characterizations. The aged Ti-5Al-7.5V exhibits superior tensile and fatigue properties, alongside a wide range of fatigue life when tested at the stress levels of - 700-800 MPa. Fatigue failure was dominated by surface and subsurface crack initiation at facets matching basal planes. These faceted primary alpha (alpha p) grains generally have a medium or high Schmid factor (SF) for basal < a > slip. Moreover, a basal faceting process also occurred in the "hard" grains, in which the c-axis of the HCP-alpha grains was approximately parallel to the loading axis so that the < a > type slips were thought to be suppressed. The observed internal microcracks were formed along the grain boundaries located in clusters of alpha p grains, especially along (0001) twist boundaries. Furthermore, transmission electron microscope observations evidenced the absence of intense slip bands within faceted grain and fatigued alpha p grains, which indicates that the facet growth should not along the pre-existing slip bands resulting from high cycle fatigue loadings. The pre-existing structural defects including dislocation networks and subgrain boundaries within alpha p grains are relatively stable configurations under fatigue loadings. The observed fine (-500 nm in diameter) silicides were widely dispersed, whether the silicide can act as the crack nucleation site still needs further more detailed studies and this remains an open question.

High Cycle Fatigue in Ti-6Al-4V Titanium Alloy

A Study of the Back Stress and the Friction Stress Behaviors of Ti-6Al-4V Alloy During Low Cycle Fatigue at Room Temperature

Effects of Tensile/compressive Overloads on Fatigue Crack Growth Behavior of an Extra-Low-interstitial Titanium Alloy

Very high‐cycle fatigue behaviour of Ti‐6Al‐4V alloy under corrosive environment

Microstructural effects on the high-cycle fatigue and fracture behaviors of Ti-6Al-4V alloy

Fatigue Behavior of Titanium Alloy Ti-4Al-2V under High Cycle Loading at Elevated Temperature

Local Strain Accumulation in Fatigue Crack Propagation Process of Ti‐6Al‐4V Alloy

High cycle fatigue of Ti-600 alloy

High Cycle Fatigue Life of Ti-6Al-4V Titanium Alloy Processed by Electron Beam Welding

Ultra-High Cycle Fatigue Behavior of Ti-6al-4v Alloy

Fatigue Properties of Ti-6al-4v Alloy in Vacuum at Cryogenic Temperature

High cycle fatigue behavior of implant Ti-6Al-4V in air and simulated body fluid

Stress Ratio and Notch Effects on the Very High Cycle Fatigue Properties of a Near-Alpha Titanium Alloy

Microstructure Evolution and Fatigue Crack Growth of Diffusion Bonded Ti-6Al-4V Titanium Alloy

Effects Of Residual Stresses On The High Cycle Fatigue Behavior Of Ti-6al-4v

Crack Initiation Mechanism in a High-Strength Ti-5Al-7.5V Alloy Subjected to High Cycle Fatigue Loading

The effect of residual stress on high‐cycle fatigue properties and its evaluation method of Ti‐6Al‐4V alloy

High cycle fatigue behavior of additively manufactured Ti-6Al-4V alloy with HIP treatment at elevated temperatures

High cycle and very high cycle fatigue of TC17 titanium alloy: Stress ratio effect and fatigue strength modeling

Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy

High Cycle Fatigue Of Ti-6al-4v Alloy In Simulated Steam Environment