Abstract:The surface morphology and internal residual stress have influence on the critical current density (Jc) of REBa2Cu3O7-sigma (REBCO) coated conductor. In order to modulate them, a series of Y0.5Gd0.5Ba2Cu3O7-sigma (YGBCO) films were prepared by pulsed laser deposition (PLD) through introducing a seed layer in this paper. The thicknesses of seed layer changes from about 2 nm to 30 nm. For comparison, a standard sample without seed layer was fabricated at the same deposition condition. The surface morphology was illustrated by Scanning electron microscopy (SEM). The surface roughness was scanned by Atomic force microscopy (AFM). The microstructure and internal strain were measured by X-ray Diffraction (XRD). DC four-probe method was used to measure the critical current of the samples at 77 K and self-field. As a result, all samples have high Jc of about 4 MA/cm(2), while the self-field Jc of the YGBCO films can be promoted by the seed layer. The results of our research work are as follows. First of all, seed layer makes the deposition of the YGBCO layer much easier to control. By this way, we can decrease the surface roughness of the samples. Furthermore, the internal residual stress of the YGBCO films with seed layer decrease. Finally, the best thickness of the seed layer was found by summarizing and analyzing the conditions of seed layer. (C) 2018 Elsevier B.V. All rights reserved.

The Effect of Laser Energy and Target–Substrate Distance on the Quality of CeO 2 Seed Layer Deposited by PLD

Changes in the structural and optical properties of CeO2 nanocrystalline films: Effect of film thickness

Investigation of Growth, Structural and Optical Properties of CeO2 Nanocrystalline Thin Films Prepared by Pulsed Spray-Evaporation Chemical Vapor Deposition (PSE-CVD)

Effects of PLD Deposited ZnO Seed Layer on the Structure and Morphology of ZnO Nanowires Prepared by CBD Method

Growth orientation and surface morphology of CeO2 films for high-Jc YBCO films on biaxially-textured Ni tape by PLD

Effect of CeO 2 Cap Layers on the Preparation of YBCO Films on Rolling-Assisted Biaxially Textured Substrates by Pulsed Laser Deposition

Crystal-orientation controlled epitaxial CeO2 dielectric thin films on Si(100) substrates using pulsed laser deposition

Influences of Ni–5 at.%W Alloy Substrates on the Epitaxial Growth and Surface Morphologies of CeO 2 Films Deposited by PLD

Structural characteristics and the control of crystallographic orientation of CeO2 thin films prepared by laser ablation

Effects of oxygen pressure on the c -axis oriented growth of LiNbO 3 thin film on SiO 2 /Si substrate by pulsed laser deposition

Superconducting Properties and Microstructures of CeO2 Doped YBa2Cu3O7−δ Films Fabricated by Pulsed Laser Deposition

Effect of the Seed Layer on the Y0.5Gd0.5Ba2Cu3O7-σ Film Fabricated by PLD

Surface Morphology and Facets Evolution of Ceo2 Nanoarray Superstructures Fabricated by Pulsed Laser Deposition

Structure and Magnetic Properties of Co–CeO2 Thin Films Deposited by PLD on Al2O3 (0001) Substrates

Effect of growth rate on the characteristics of LiNbO3 waveguide thin films on SiO2/Si substrate by PLD

Surface Morphology of Cerium Oxide Layer and Its Effect on the Performance of Superconducting Layer

Effect of TiO2 Seeding Layers on the Texture in (pb,la,ca)tio3 Films

Control of Self-assembled Particles on Thin YSZ Film Deposited by PLD

Preparing Pure C-axis Oriented SrTiO3 Film on CeO2 Film by Introducing a Nano-Y0.5gd0.5ba2cu3o7- Layer

Highly C-Axis Oriented LiNbO3 Thin Film Grown on SiO2/Si Substrates by Pulsed Laser Deposition

Substrate effect on the PLD growth of ferroelectric materials thin films