Abstract:This study focused on the development of Fe–Co/kaolin catalyst by a wet impregnation method. Response surface methodology was used to study the influence of operating variables such as drying temperature, drying time, mass of support and stirring speed on the yield of the catalyst. The catalyst composite at best synthesis conditions was then calcined in an oven at varied temperature and time using 22 factorial design of experiment. The catalyst with optimum surface area was then utilized to grow carbon nanofiber (CNF) in a chemical vapour deposition (CVD) reactor. Both the catalyst and CNF were characterized using high-resolution scanning electron microscopy, high-resolution transmission electron microscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy. On the influence of operating variables on the yield of catalyst, the results showed that an optimum yield of 96.51% catalyst was obtained at the following operating conditions: drying time (10 h), drying temperature (110 °C), stirring speed (100 rpm) and mass of support (9 g). Statistical analysis revealed the existence of significant interactive effects of the variables on the yield of the catalyst. The HRSEM/XRD/BET/TGA analysis revealed that the particles are well dispersed on the support, with high surface area (376.5 m2/g) and thermally stable (330.88 °C). The influence of operating parameters on the yield of CNF was also investigated and the results revealed an optimum yield of 348% CNF at the following operating conditions: reaction temperature (600 °C), reaction time (40 min), argon flow rate (1416 mL/min) and acetylene/hydrogen flow rate (1416 mL/min). It was found from statistical analysis that the reaction temperature and acetylene/hydrogen flow rates exerted significant effect on the CNF yield than the other factors. The contour and surface plots bi-factor interaction indicated functional relationship between the response and the experimental factors. The characterization results showed that the synthesized CNF is thermally stable, twisted and highly crystalline and contain surface functional groups. It can be inferred from the results of various analyses that the developed catalyst is suitable for CNF growth in a CVD reactor.

Effect of Precursors on the Growth of Carbon Filaments Onto Clay Surface

Effect of Iron Concentration on the Growth of Carbon Nanotubes on Clay Surface

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

Effect of Hydrocarbons Precursors on the Formation of Carbon Nanotubes in Chemical Vapor Deposition

Selective Preparation of Carbon Nanoflakes, Carbon Nanospheres, and Carbon Nanotubes Through Carbonization of Polymethacrylate by Using Different Catalyst Precursors

The Growth of Carbon Nanostructure on the Mechanical-Milling-Derived Catalyst Precursors

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Micro-Nano Carbon Structures with Platelet, Glassy and Tube-Like Morphologies

Growth of Carbon NanoStructures in Ceramic Materials

Fabrication of Carbon Nanotubes over Metal Catalysts Supported on Mesoporous Molecular Sieves

Growth of Carbon Nanotubules on Fe-loading Zeolites and Investigation of Catalytic Active Center

Effect of catalyst on the growth of aligned carbon prepared by microwave chemical vapor deposition

Effect of catalytic condition on the properties of carbon nanotubes/calcium aluminate cement and its synthesis mechanism

In situ growth of CNTs on carbon fiber by chemical vapor deposition

Growth of Carbon Nanotubes with Metal-Loading Mesoporous Molecular Sieves Catalysts

Effect of Carbon Deposits on the Reactor Wall During the Growth of Multi-Walled Carbon Nanotube Arrays

Optimization of bi-metallic (Fe–Co) catalyst on kaolin support for carbon nanofiber growth in a CVD reactor

Effect of organic additives in catalyst preparation on the growth of single-wall carbon nanotubes prepared by catalyst-assisted chemical vapour deposition

The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition

Exploring Precursor Effect in In-Situ Reconstruction of Bi Metal Organic-Frameworks During CO2 Electroreduction Reaction to Tailor Formate Selectivity Towards 100