Abstract:Fe2O3-MgO/Al2O3 catalyst precursors were prepared by co-precipitation method for the growth of carbon nanotubes (CNT), and the materials were characterized by various means. The effects of reduction temperature on the surface morphology, texture properties and reduction degree of the catalysts were systematically discussed, and the effects of the catalysts on the diameter uniformity, defect degree and carbon yield of carbon nanotubes were further investigated. The results showed that the reduction temperature strongly affected the reduction degree and morphology of Fe-containing species. As the reduction temperature increased from 560 °C to 760 °C, the reduction products were (Fe2O3,Fe3O4), (Fe3O4, FexO), (FexO, Fe), (FexO, Fe), and the specific surface area tended to decrease while the pore size gradually increased, which would have a great influence on the further reduction of catalyst after C3H6 was introduced. The results showed that the best catalyst performance was achieved when the reduction temperature was 660 °C, and carbon nanotubes with a carbon yield of 1800%, graphitization degree of 0.98, diameter distribution in the range of 6~20 nm, specific surface area of 260.55 m2/g and resistivity of 52.6 mΩ·cm could be obtained, which was due to the composition and structure of the active material in the catalyst at this time were favorable for further diffusion of carbon.

Growth of Carbon Nanotubules on Fe-loading Zeolites and Investigation of Catalytic Active Center

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

A novel method of varying the diameter of carbon nanotubes formed on an Fe-supported Y zeolite catalyst

Fabrication of Carbon Nanotubes over Metal Catalysts Supported on Mesoporous Molecular Sieves

Influence of Cerium Metal As Catalyst on the Growth and Structure of Single-Walled Carbon Nanotubes

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

Formation of multi-walled carbon nanotubes by catalytic chemical vapour deposition using zeolite encapsulated nanocrystalline cobalt oxides

Growth of Carbon Nanotubes with Metal-Loading Mesoporous Molecular Sieves Catalysts

Synthesis and growth of multi-walled carbon nanotubes (MWNTs) by CCVD using Fe-supported zeolite templates

The influence of ethanol on the growth and structure of carbon nanotubes

Improvement of Fe/MgO catalysts by calcination for the growth of single- and double-walled carbon nanotubes.

How reduction temperature affects the properites of carbon nanotubes growing over Fe-MgO/Al2O3 catalyst

Catalytic effect of the spinel ferrite nanocrystals on the growth of carbon nanotubes

Growth of Carbon NanoStructures in Ceramic Materials

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Growth of Single-Walled Carbon Nanotubes from Discrete Catalytic Nanoparticles of Various Sizes

Interaction-mediated growth of carbon nanotubes on acicular silica-coated α-Fe catalyst by chemical vapor deposition

SiO2-promoted growth of single-walled carbon nanotubes on an alumina supported catalyst

Growth of Carbon Nanotubes on Si Substrate Using Fe Catalyst Produced by Pulsed Laser Deposition.

Mössbauer Study of Catalytically Grown Carbon Nanotube