Abstract:Nanocrystalline materials with the composition of (Cu0.5Ni0.5)yFe3−yO4 and a spinel structure were synthesized by the auto-combustion sol–gel method. The materials were characterized by powder X-ray diffraction, Mössbauer spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and N2 physisorption. A decrease in the unit cell parameter and increase in the crystallite size with a decrease in the copper and nickel content in ferrites were evidenced. Mössbauer analysis determined that iron ions are in the 3+ states in all compositions. Transmission electron microscopy showed that synthesized ferrite materials consisted of nanoparticles with narrow size distributions. The catalytic properties of synthesized ferrites were studied in the reaction of ethyl acetate oxidation and methanol decomposition. The conversion of ethyl acetate and CO2 selectivity increased with temperature, and this effect was most pronounced for (Cu0.5Ni0.5)0.5Fe2.5O4, for which the main part of the particles possessed sizes below 10 nm, and the mean diameter was calculated to be 4.3 nm. The catalytic activity in the reaction of methanol decomposition was the highest for (Cu0.5Ni0.5)0.25Fe2.75O4, and it decreased with the increase in Cu and Ni content in the samples. The analysis of the samples after the catalytic test indicated significant reduction transformations within the catalysts. Under the reaction medium, the spinel phase decomposed through the formation of Hägg carbide.

Catalytic effect of the spinel ferrite nanocrystals on the growth of carbon nanotubes

Synthesis of Carbon Nanotubes/Fes Fenton-Like Catalyst and Its Catalytic Properties

Effect of Active Metal Composition on the Yield and Microstructure of Carbon Nanofiber

Effects of metallic cobalt crystal phase on catalytic activity of cobalt catalysts supported on carbon nanotubes in Fischer–Tropsch synthesis

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Growth of Carbon Nanotubules on Fe-loading Zeolites and Investigation of Catalytic Active Center

Nanocrystalline (Cu0.5Ni0.5)yFe3−yO4 Ferrites: Synthesis and Characterization

Effects of Catalyst and Substrate on the Preparation of Carbon Nanotubes by ECR-CVD

Mössbauer Study on the Conversion of Different Iron-Based Catalysts Used in Carbon Nanotube Synthesis

Catalytic growth of carbon nanotubes from the internal surface of Fe-loading mesoporous molecular sieves materials

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Reduced carbon solubility in Fe nano-clusters and implications for the growth of single-walled carbon nanotubes

Catalytic formation of carbon nanotubes on Fe-loading molecular sieves materials: an XPS study

Growth of Carbon Nanotubes on the Novel Feco-Al2o3 Catalyst Prepared by Ultrasonic Coprecipitation

<i>In Situ</i> Study of Iron Catalysts for Carbon Nanotube Growth Using X-Ray Diffraction Analysis

Growth of Carbon Nanotubes using Layered Double Hydroxides Containing Transition Metal Iron,Cobalt or Nickel as Catalytic Precursors

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition

The Nature of Cobalt Species in Carbon Nanotubes and Their Catalytic Performance in Fischer–Tropsch Reaction

How reduction temperature affects the properites of carbon nanotubes growing over Fe-MgO/Al2O3 catalyst

How Catalysts Affect the Growth of Single-Walled Carbon Nanotubes on Substrates