Abstract:Fe2O3-MgO/Al2O3 catalyst precursors were prepared by co-precipitation method for the growth of carbon nanotubes (CNT), and the materials were characterized by various means. The effects of reduction temperature on the surface morphology, texture properties and reduction degree of the catalysts were systematically discussed, and the effects of the catalysts on the diameter uniformity, defect degree and carbon yield of carbon nanotubes were further investigated. The results showed that the reduction temperature strongly affected the reduction degree and morphology of Fe-containing species. As the reduction temperature increased from 560 °C to 760 °C, the reduction products were (Fe2O3,Fe3O4), (Fe3O4, FexO), (FexO, Fe), (FexO, Fe), and the specific surface area tended to decrease while the pore size gradually increased, which would have a great influence on the further reduction of catalyst after C3H6 was introduced. The results showed that the best catalyst performance was achieved when the reduction temperature was 660 °C, and carbon nanotubes with a carbon yield of 1800%, graphitization degree of 0.98, diameter distribution in the range of 6~20 nm, specific surface area of 260.55 m2/g and resistivity of 52.6 mΩ·cm could be obtained, which was due to the composition and structure of the active material in the catalyst at this time were favorable for further diffusion of carbon.

Fabrication of Carbon Nanotubes over Metal Catalysts Supported on Mesoporous Molecular Sieves

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Growth of Carbon Nanotubes with Metal-Loading Mesoporous Molecular Sieves Catalysts

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Growth of Carbon Nanotubules on Fe-loading Zeolites and Investigation of Catalytic Active Center

Growth of Carbon NanoStructures in Ceramic Materials

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

Influence of Cerium Metal As Catalyst on the Growth and Structure of Single-Walled Carbon Nanotubes

High-Density Growth of Single-Wall Carbon Nanotubes on Silicon by Fabrication of Nanosized Catalyst Thin Films

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Catalytic Engineering of Carbon Nanotube Production

A novel method of varying the diameter of carbon nanotubes formed on an Fe-supported Y zeolite catalyst

How reduction temperature affects the properites of carbon nanotubes growing over Fe-MgO/Al2O3 catalyst

General rules governing carbon nanomaterial growth directly on metal support by chemical vapor deposition

Carbon Nanotubes: in Situ Monitoring the Role of Working Metal Catalyst Nanoparticles for Ultrahigh Purity Single‐Walled Carbon Nanotubes (adv. Funct. Mater. 40/2013)

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Carbon nanotubes over novel catalysts

The Growth of Carbon Nanostructure on the Mechanical-Milling-Derived Catalyst Precursors

Effects Of The Supporting Method Of The Active Constituent Of Catalyst On The Syntheses Of Carbon Nanotube Using Cvd Method

Carburization of Fe/Ni Catalyst for Efficient Growth of Single-Walled Carbon Nanotubes