Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Thermal performance comparison of oscillating heat pipes with SiO 2/water and Al 2O 3/water nanofluids

Thermal Performance of an Oscillating Heat Pipe with Al2O3–water Nanofluids

Experimental Investigation to Elucidate the Temporal Effect of Nanofluids on the Thermal Performance of Heat Pipes

Experimental Investigation of Thermal Performance of Miniature Heat Pipe Using SiO2-Water Nanofluids

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe

Effect of Al2O3/water nanofluid on performance of parallel flow heat exchangers

Visualization Of Two-Phase Flows In Nanofluid Oscillating Heat Pipes

Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management

Pressure Drop and Heat Transfer of Al2o3-H2o Nanofluids Through Silicon Microchannels

Application of aqueous nanofluids in a horizontal mesh heat pipe

Experimental Study on Aln/H2o and Al(2)O(3)/H2o Nanofluid Flow Boiling Heat Transfer and Its Influence Factors in A Vertical Tube

FLOW AND HEAT TRANSFER CHARACTERISTICS IN NANOFLUID OSCILLATING HEAT PIPES

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Experimental investigation on alumina nanofluids in vehicle heat exchanger

Numerical Study of Flow and Heat Transfer Characteristics for Al2O3 Nanofluid in a Double-Pipe Helical Coil Heat Exchanger

Fluid Flow and Heat Transfer Characteristics of Alumina Organic Nanofluid

Experimental Study on Al2o3/H2o Nanofluid Flow Boiling Heat Transfer under Different Pressures

Investigation on thermal performance of electric heaters with nanofluids

Study on Enhanced Heat Transfer and Stability Characteristics of Al2O3–SiO2/Water Hybrid Nanofluids

Experimentation with different alumina hybrid (50:50) suspensions as coolant on plate heat exchanger performance