Abstract:Numerical simulations of Al2O3/water nanofluid in turbulent pipe flow are performed with considering the particle convection, diffusion, coagulation, and breakage. The distributions of particle volume concentration, the friction factor, and heat transfer characteristics are obtained. The results show that the initial uniform distributions of particle volume concentration become nonuniform, and increase from the pipe wall to the center. The nonuniformity becomes significant along the flow direction from the entrance and attains a steady state gradually. Friction factors increase with the increase of particle volume concentrations and particle diameter, and with the decrease of Reynolds number. The friction factors increase remarkably at lower volume concentration, while slightly at higher volume concentration. The presence of nanoparticles provides higher heat transfer than pure water. The Nusselt number of nanofluids increases with increasing Reynolds number, particle volume concentration, and particle diameter. The rate increase in Nusselt number at lower particle volume concentration is more than that at higher concentration. For a fixed particle volume concentration, the friction factor is smaller while the Nusselt number is larger for the case with uniform distribution of particle volume concentration than that with nonuniform distribution. In order to effectively enhance the heat transfer using nanofluid and simultaneously save energy, it is necessary to make the particle distribution more uniform. Finally, the expressions of friction factor and Nusselt number as a function of particle volume concentration, particle diameter and Reynolds number are derived based on the numerical data.

Experimental Study on Al2o3/H2o Nanofluid Flow Boiling Heat Transfer under Different Pressures

Experimental Study on Aln/H2o and Al(2)O(3)/H2o Nanofluid Flow Boiling Heat Transfer and Its Influence Factors in A Vertical Tube

Experimental Investigation on Nanofluid Flow Boiling Heat Transfer in a Vertical Tube under Different Pressure Conditions

Experimental Study on Boiling Heat Transfer of Α-Al2o3-water Nanofluid

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

A Correlation of Nanofluid Flow Boiling Heat Transfer Based on the Experimental Results of Aln/H2o and Al2o3/H2o Nanofluid

EXPERIMENTAL STUDY ON THE CRITICAL HEAT FLUX OF NANOFLUID FLOW BOILING UNDER DIFFERENT CONDITIONS

Thermal Physics and Critical Heat Flux Characteristics of Al2O3-H2O Nanofluids

Numerical Modeling of Turbulent Heat Transfer of a Nanofluid at Supercritical Pressure

Numerical Study of Flow and Heat Transfer Characteristics for Al2O3 Nanofluid in a Double-Pipe Helical Coil Heat Exchanger

Pressure Drop and Heat Transfer of Nanofluid in Turbulent Pipe Flow Considering Particle Coagulation and Breakage

Boiling Heat Transfer of Nanofluids: the Effect of Heating Surface Modification

The Characteristics and Correlation of Nanofluid Flow Boiling Critical Heat Flux

Pressure Drop and Heat Transfer of Al2o3-H2o Nanofluids Through Silicon Microchannels

A Mechanism of Heat Transfer Enhancement or Deterioration of Nanofluid Flow Boiling

Experimental Investigation of Al2O3/Water Nanofluid Through Equilateral Triangular Duct with Constant Wall Heat Flux in Laminar Flow

Effect of nanoparticle concentration and surfactants on nanofluid pool boiling

Visualization Investigation on Heat and Mass Transfer of Al2O3 Nanofluid in Vapor Chamber

Numerical modeling and analysis of nanofluids subcooled boiling in a horizontal circular tube

An investigation on the heat transfer characteristics of nanofluids in flow boiling by molecular dynamics simulations

Fluid Flow and Heat Transfer Characteristics of Alumina Organic Nanofluid