Abstract:The measure of External-Reactor-Vessel-Cooling (ERVC) for In-vessel retention (IVR) is widely employed in severe accidents for advanced nuclear power plants. Instead of using pure water, nanofluids have a much greater likelihood of increasing the safety margin of the IVR-ERVC. However, the effect of nanofluids on the critical heat flux is in controversy, not only for the phenomenon, but also for the mechanism involved. In this study, visualization method is used to quantify the bubble dynamics for three types of nanofluids at critical heat flux, which reveals that, in the mass concentration range of 0 to 0.004 omega t %, the critical heat flux of Al2O3 nanofluids with a particle size of 50 nm increases with the increase of concentration. Moreover, the Taylor critical wavelength dominates the critical heat flux of nanofluids: the shorter this value, the greater the CHF value. Specifically, the Taylor critical wavelength of Al2O3 nanofluids at a mass concentration of 0.004 omega t% is reduced by 45.20 %, compared to pure water. Finally, based on the hydrodynamic instability model and the influence of the nanofluid on wettability, a Taylor critical wavelength prediction model and a critical heat flux prediction model of the nanofluid are well developed. These models are fully validated using experimental data from this research, as well as relevant experimental data and classical models from abroad, which elicits the error margin between the predicted values of the Taylor critical wavelength and the experimental data is within +/- 4 %, and the error margin of the predicted values of CHF is around +/- 15 %.

EXPERIMENTAL STUDY ON THE CRITICAL HEAT FLUX OF NANOFLUID FLOW BOILING UNDER DIFFERENT CONDITIONS

The Characteristics and Correlation of Nanofluid Flow Boiling Critical Heat Flux

An Innovative Method for the Theoretical Investigation on the Critical Heat Flux of Nanofluid Flow Boiling with Nanoparticle Deposition

Experimental and Numerical Studies on Enhanced Flow Boiling in Tube with Superwetting Micro-Finned Surfaces

Experimental Investigation on Nanofluid Flow Boiling Heat Transfer in a Vertical Tube under Different Pressure Conditions

Heat Transfer and Critical Heat Flux of Nanofluid Boiling: A Comprehensive Review

Experimental Study on Al2o3/H2o Nanofluid Flow Boiling Heat Transfer under Different Pressures

Numerical Modeling of Turbulent Heat Transfer of a Nanofluid at Supercritical Pressure

THE MECHANISM OF ENHANCEMENT OR DETERIORATION FOR NANOFLUID FLOW BOILING BASED ON THE EXPERIMENTAL RESULTS

An investigation on the heat transfer characteristics of nanofluids in flow boiling by molecular dynamics simulations

Experimental studies of flow boiling heat transfer by using nanofluids

Critical Heat Flux of Nano-Fluids Boiling in Vertical Small Tubes with Closed Bottom

Critical Heat Flux and the Boiling Heat Transfer Mechanism of Nanofluids Based on Interface Instability: Experiment and Engineering Model Study

Numerical modeling and analysis of nanofluids subcooled boiling in a horizontal circular tube

Investigation of critical heat flux enhancement pool boiling experiment by using nanofluids

Latest developments in boiling critical heat flux using nanofluids: A concise review

Experimental Study on Boiling Heat Transfer of Α-Al2o3-water Nanofluid

Experimental Study on Aln/H2o and Al(2)O(3)/H2o Nanofluid Flow Boiling Heat Transfer and Its Influence Factors in A Vertical Tube

Fundamental Issues, Technology Development, and Challenges of Boiling Heat Transfer, Critical Heat Flux, and Two-Phase Flow Phenomena with Nanofluids

Heat Transfer Characteristics and Chf Prediction in Nanofluid Boiling

A Correlation of Nanofluid Flow Boiling Heat Transfer Based on the Experimental Results of Aln/H2o and Al2o3/H2o Nanofluid