Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Investigation on thermal performance of electric heaters with nanofluids

Analysis of the mechanism of enhanced heat transfer by nanofluids

Review on Thermal Performance of Nanofluids With and Without Magnetic Fields in Heat Exchange Devices

Performance analysis of a plate heat exchanger using various nanofluids

Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels

Investigation of heat transfer enhancement using ferro-nanofluids (Fe3O4/water) in a heated pipe under the application of magnetic field

Investigation of heat transfer properties of CuZnFe2O4-water and NiZnFe4O4-water nanofluids under magnetic field effect

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Enhancing thermal performance in enclosures filled with nanofluids subjected to sinusoidal heating: a numerical study

Analyzing Heat Transfer: Experimental and Theoretical Studies on Metal Oxide-Based Binary Nanofluid in Mini Hexagonal Tube Heat Sink

Experimental Investigation of Thermal Performance of Miniature Heat Pipe Using SiO2-Water Nanofluids

Enhancing Closed System Efficiency through CuO Nanofluids: Investigating Thermophysical Properties and Heat Transfer Performance

Investigation of Thermodynamic Properties and Stability of Metal Oxide (CuO and Al2O3)/Deionized Water Nanofluids for Enhanced Heat Transfer Applications

Experimental Investigation on Thermal Performance of Double-U-tube Heat Exchanger Using CuO/water Nanofluid as Heat Transfer Fluid

Thermal Performance Intensification of Car Radiator Using SiO2/Water and ZnO/Water Nanofluids

On the assessment of the thermal performance of microchannel heat sink with nanofluid

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Heat transfer enhancement in magnetohydrodynamic hybrid nanofluids over a Bi-directional extending sheet with slip and convective conditions

Implicit finite difference simulation of non-similar conduction–convection interaction of magnetohydrodynamics water-Cu nanofluid flow along a vertical surface

Numerical investigation on the thermal performance of parabolic trough solar collector with synthetic oil/Cu nanofluids

An Experimental Investigation on Aqueous Fe–CuO Hybrid Nanofluid Usage in a Plain Heat Pipe