Abstract:MEMS (Microelectromechanical Systems) electrostatic actuators have been successfully applied in a number of areas, including accelerometers, gyroscopes, pressure sensors, and optical devices. In this paper, the actuator optimization of a silicon bulk-micro machined MEMS compound electrostatic actuator of an optical device is discussed. The actuator uses folded-beam structure to enhance the electromechanical performance. The movable block is connected to the compound electrostatic actuator through unequal-height folded-beam springs. The lower-height springs connect the block with parallel plates, and can convert the descending motion of the plates into out-of-plane tilting motion of the block efficiently Additionally, the block is capable of in-plane motion by applying the driving force of the comb-drive actuator through structural connection. ANSYS FEM simulation is used to extract the device electromechanical performance and resonant frequency of the device. By gradually varying the design parameters in ANSYS simulation, the relationship between the actuator electromechanical performance and various design parameters is derived. The curves of actuator electromechanical performance versus beam length and beam height are derived and they are in good agreement with theoretical prediction. From the analysis it is concluded that the actuator behavior strongly depends upon various actuator parameters. By adjusting design parameters, desired electromechanical performance can be obtained. Based on the simulation results, a set of optimized design parameters for the compound electrostatic actuator is decided. The above-proposed MEMS compound electrostatic actuator may be used for many applications, such as optical device and micro-operating.

Analysis of Characteristics of Micromachined Electrostatic Repulsive Actuator

RESEARCH ON PULL-IN AND RELEASE PHENOMENON OF ELECTROSTATIC MICROPUMPS

Laterally driven electrostatic repulsive-force microactuators using asymmetric field distribution

Design of an Electrostatic Repulsive-Force Based Vertical Micro Actuator

Research on an Electrostatic Repulsive-Force Based Vertical Micro Actuator

An Electrostatic Mems Spring Actuator With Large Stroke And Out-Of-Plane Actuation

Design and Analysis of a Novel MEMS Out-of-Plane Actuator

Design and analysis of repulsive electrostatic driven MEMS actuators

Electrostatically Actuated Microgripper Based on Silicon Bulk Micromachining

Electrostatic repulsive out-of-plane actuator using conductive substrate

Study on Micro-Electromagnetic Force in Electromagnetic Microactuator

Fabrication and Characterization of Micro Electromagnetic Linear Actuators

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

A multi-electrode and pre-deformed bilayer spring structure electrostatic attractive MEMS actuator with large stroke at low actuation voltage

Analysis of an electrostatic micro-actuator based on vertically- horizontally bending

Experimental Study on Electrostatically Actuated Micro-Gripper Based on Silica Process

Mechanical Behavior Analysis on Electrostatically Actuated Rectangular Microplates

Design of a MEMS micromirror actuated by electrostatic repulsive force

Micro Electromagnetic Actuator For Micropump

A Micro Electromagnetic Actuator with High Force Density

Coupled-field finite element analysis of MEMS compound electrostatic actuator by using the ANSYS software