Abstract:Ti 2 AlNb-based alloy foils are promising for aerospace applications. In this work, we investigate the effects of different hot rolling processes on the microstructure and mechanical properties of hot rolled sheets, as well as on the deformation mechanism, microstructure evolution, and mechanical properties of subsequent cold rolling during the formation of Ti 2 AlNb-based alloy foils. Due to the finer uniform grain size, lower dislocation density, and higher compatible deformation between the phases, the elongation of the sheet after hot rolling in the α 2 + O + B2 phase field is 6.8%, which is 2.5 times higher than that of after hot rolling in the α 2 + B2 phase field. The difference in microstructure and mechanical properties after the hot rolling affects the quality of the formation, the deformation mechanism, and the mechanical properties during the cold rolling. The deformation in the cold rolling is mainly in the form of shear bands. Due to the difference in microstructure, the macro shear bands are oriented parallel or at 30–60° to the rolling direction. As the degree of cold rolling deformation increases, the macro shear bands become denser and wider. When rolling to 80%, the micro shear bands <200 nm thick are formed in the microstructure. In addition, during the cold rolling, work hardening, dislocation strengthening, and grain refinement lead to a gradual increase in strength, with elongation decreasing first and then increasing. The texture evolution affects the elastic modulus of the alloy, where the increase in {111}〈110〉 texture causes a decrease in the elastic modulus, while much anomalous slip system {110}〈001〉 activates the {111}〈112〉 texture and increases the elastic modulus. This process should be considered for the cold rolling preparation of Ti 2 AlNb-based alloy foil because of the superior properties of the sheet after hot rolling in the α 2 + O + B2 phase field, its better strength and elongation and higher yield when cold rolling.

Microstructure and Mechanical Property of Co40NiCrMoalloy Deformed with Cold Rolling

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Effect of Deep-Cooling Rolling Deformation on the Microstructure and Mechanical Properties of an Al-4.5Cu-1.5Mg-0.6Mn-0.2Ti Alloy

Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures

Influence of cold rolling deformation on mechanical properties and corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy

Texture Evolution and Plastic Deformation Mechanism of Cold-Drawn Co-Cr-Ni-Mo Alloy

Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Effect of Cyclic Warm-Rolling Technique on Mechanical Properties of MoCu30 Thin Plates with Heterogeneous Structure

Effect of Cold Rolling and Cryogenic Treatment on the Microstructure and Mechanical Properties of Fe–32Ni Alloy

Research on Effects of Rolling-Drawing Deformation on Performance of Cu-10Ni-1Fe-1Mn Alloy

Enhanced formability of Al–Mg–Si–Zn alloy sheet via dislocation structure and texture during cold rolling

Evolution of Microstructural and Mechanical Properties during Cold-Rolling Deformation of a Biocompatible Ti-Nb-Zr-Ta Alloy

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Microstructure and Texture Evolution of Al0.3CoCrFeNi High-Entropy Alloy After Cold Rolling Deformation

Texture, Microstructure and Mechanical Properties of 6111 Aluminum Alloy Subject to Rolling Deformation

Effect of cold rolling pre-deformation on microstructure and properties of V-1469 Al-Li alloy

Study of microstructure and mechanical properties of quasi-continuous network structured (Ti3AlC2-Al3Ti)/2024Al composites based on hot rolling

Effects Of Rolling Process On Microstructure And Mechanical Property Of 7050 Aluminum Alloy

Effect of hot rolling process on the evolution of microstructure and mechanical properties of Ti 2 AlNb-based alloy foil during cold rolling

Effect of Cold Rolling on the Microstructure and Mechanical Behaviors of High-Nitrogen and Low-Nickel Alloy