Abstract:In this paper, a novel substrate for white light LED (light emitting diode) is presented, the silicon substrate in which silicon wafer with cavities and TSVs (through silicon via). The fabrication process begins with double-side polished 4-inch silicon wafer. Firstly a silicon dioxide layer with 0.8um thickness is formed on the silicon wafer through thermal oxidation. Then the photo-resistor layer with patterns on both sides of the wafer is carried out using lithography. The following step is to open silicon dioxide windows by performing RIE (reactive ion etching) on both sides of the wafer. After RIE process the wafer is sent into KOH bath for wet etching to form cavities and TSVs. Additional thermal oxidation process for electrical insulation is needed to cover the silicon, which is exposed in the wet etching step. Sputtering is used to form copper seed layer on both sides of the wafer. Copper layer is thickened and TSVs are filled by electroplating. After lithography, silver layer is sputtered on the cavity side of the wafer for LED chip mounting, wire bonding and forming side wall mirror. The copper layer area not wanted is etched away in FeCl3 solution. Blue LED chip is then mounted onto the substrate using solder by reflow process in the cavity. Yellow phosphor and epoxy mixture is then printed into the cavity to cover the LED chip for color turning. This method offers a structure with low profile and compact for LED wafer level packaging. Experimental results verify the feasibility of proposed method.

Chip-on-board (COB) wafer level packaging of LEDs using silicon substrates and chemical foaming process(CFP)-made glass-bubble caps

Design of Optical Structure for Chip-on-board Wafer Level Packaging LEDs

Preparation Of Wafer-Level Led Packaging Used Uniform Micro Glass Cavities By An Improved Chemical Foaming Process (Cfp)

Silicon based wafer-level packaging for flip-chip LEDs

A Novel Molding Process for Wafer Level LED Packaging Using Uniform Micro Glass Bubble Arrays

A sandwich structure of multi-chip COB LED with double flat glass boards coated with phosphors film by screen printing technique

A Design and Qualification of LED Flip Chip-on-Board Module with Tunable Color Temperatures

Full-Color Led Display Research Based On Chip On Board(Cob) Package

Luminescence mechanism analysis on high power tunable color temperature Chip-on-Board white LED modules

Cylindrical Tuber Encapsulant Layer Realization by Patterned Surface for Chip-on-Board Light-Emitting Diodes Packaging

A Study of Flip-Chip Direct Attachment LED COBs with Metal Core Print Circuit Boards

A Cylindrical Tuber Encapsulant Geometry for Enhancing Optical Performance of Chip-on-Board Packaging Light-Emitting Diodes

Novel Application-Specific Led Packages Integrated With Compact Freeform Lens

A Facile Approach to Fabricate Patterned Surfaces for Enhancing Light Efficiency of COB-LEDs

Thermal Analysis for COB Based on Glass Substrate

Enhancing Luminous Efficiency of Quantum Dot-Based Chip-on-Board Light-Emitting Diodes Using Polystyrene Fiber Mats

High-luminance and High-Efficiency Multi-Chip Light-Emitting Diode Array Packaging Platform with Nanoscale Anodized Aluminum Oxide on Silicon Substrate

Opto-Thermal Performances Investigation of Phosphor-in-Glass Based Chip-Scale White LEDs

Optical Characterization Of A Light Bulb With The Waffle Pack Led Wlp Module

Combined Experimental and Monte-Carlo Ray-Tracing Approach for Optimizing Light Extraction in LED COB Modules

Silicon Substrate with TSV for Light Emitting Diode Packaging