Abstract:This study presents a structure design and process method for lens type LED package. Dome type or side-emitting-enhancement silicone lens without molding process are achieved. The ceramic ring is adopted as the confine for the encapsulant. The surface intension along the sidewall of ceramic ring and silicone surface, the cohesion force and the gravity of silicone determine the shape of dome type silicone lens. The cone shape tooling coated with a releasing material is immersed into the dome type silicone lens before the silicone fully hardening. After curing simultaneously, to remove the tooling from package, the package with side-emitting-enhancement silicone lens is finished. With the mentioned architecture and process, this LED package herein has three merits, (1) to improve light extraction efficiency: reduce the chance of total internal reflection by the geometry of dome type silicone lens. (2)To enhance the flexibility of LED package design, the die placement location would be constrained by the mold in the traditional package process. (3) Mold-less side-emitting-enhancement silicone lens. Furthermore, two types of cone shape tooling are implemented and compared for side-emitting-enhancement silicone lens. Measurement results show the ratio between the lens high and lens radius could achieve 0.9:1. The view angles of dome type and side-emitting-enhancement LED packaged devices can reach 153° and 180 °, respectively. As using the same brightness grade of LED chip, the luminous flux is increasing 15% as compared the dome type package with the commercial PLCC (Plastic Leaded Chip Carrier) type package. The luminous flux of side-emitting-enhancement LED package decreases 8% as compared with the dome type one.

Development of a “Flip Glass Substrate” LED package technology for color bin yield and view angle enhancement

‘Flip Glass Substrate’ Package Technology for LED Yield and Performance Enhancement

Designs on Flip-Glass of LED Package for Selective Enhancement of Emitting-Intensity and View-Angle

Color-filtered Phosphor-in-glass for LED-lit LCD with Wide Color Gamut

Silicon based wafer-level packaging for flip-chip LEDs

Nanostructured NdF3 Glass Ceramic: an Efficient Bandpass Color Filter for Wide-Color-gamut White LED

Five-Surface Phosphor-in-Glass for Enhanced Illumination and Superior Color Uniformity in Large-View Scale LEDs

A sandwich structure of multi-chip COB LED with double flat glass boards coated with phosphors film by screen printing technique

Glass-ceramic Phosphors for Solid State Lighting: A Review

Β‐sialon:Eu2+ Phosphor‐in‐Glass Film: an Efficient Laser‐Driven Color Converter for High‐Brightness Wide‐Color‐Gamut Projection Displays

Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix

Polymer Dispensing and Embossing Technology for the Lens Type LED Packaging

Thermal, optical and electrical analysis on phosphor-converted white LED Chip Scale Packages with both experiment and simulation

Enhancing Optical Performance of Chip-Scale Packaged White LEDs by Phosphor-in-Glass With High-Reflective Dam

Led Package with Dome/Side-Emitting-Enhancement Silicone Lens Achieved by Dispensing and Geometry Transferring

Design of Optical Structure for Chip-on-board Wafer Level Packaging LEDs

High stability modified CsPb(ClBr)3@glass@PS for wide color gamut mini-LED backlight displays

41‐2: A Patterned Packaging Scheme of MiniLED Tiled Display with HighTransmittance and High Color Consistency in Light and Dark States

Reliable and Efficient Phosphor-in-Glass-Based Chip-Scale Packaging for High-Power White LEDs

Enhancing the Efficiency of Color Conversion Micro-LED Display with a Patterned Cholesteric Liquid Crystal Polymer Film

Novel scattering and color converting substrates for simple-structured white organic light-emitting diodes