Abstract:In the absence of flux measurements, techniques of field orientations depend on motor parameters, particularly on rotor resistances. During operation in flux-oriented mode, online continuous estimation of harmonic and fundamental rotor resistances is important for multiphase IM. To limit the core saturation and to achieve the synchronous and aligned air-gap flux density distribution, the harmonic plane is based on magnetizing flux-oriented control (MFOC) whereas the fundamental plane is taken as rotor flux-oriented control (RFOC). Mismatch harmonic and fundamental resistances trigger deviations in the rotor and magnetizing flux and also cause misalignment in the resultant induced electromotive force (EMF) waveform which could, in turn, be the reason for over-excitation and under-excitation. This article formulates the simultaneous online identification of rotor resistances for particularly MFOC harmonic plane while the fundamental plane is RFOC based on the dot product of rotor flux and stator current for making a model reference adaptive system (MRAS). Mismatched stator resistance and dead time of inverter have a negligible effect on the reference model during steady state. Convergence and steady-state performance can be acquired for a variation of load conditions particularly at heavy loading. The validation of the proposed approach is verified through simulation and experiment results by incorporating a multiphase platform consisting of a seven-phase induction machine.

Initial rotor position estimation of an IPMSM based on PWM inverter carrier frequency component

Permanent Magnet Linear Synchronous Motor Mover Position Estimation at Zero and Low Speed Using Eddy Current Loss Equivalent Resistance

Analysis of Rotor Position Estimated Error for IPMSM Using Carrier Frequency Component Method

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

Initial rotor position estimation for interior permanent magnet synchronous motor

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

A precise method to estimate the initial rotor position of IPMSM

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Initial Rotor Position Estimation Considering Magnetic Cross-Coupling Based on IPMSM

Effect of inductance parameters on the rotor position estimation for IPMSM

Fast Initial Rotor Position Estimation for IPMSM With Unipolar Sequence-Pulse Injection

Initial position estimation for sensorless surface-mounted PMSM with near-zero saliency at standstill

Initial rotor position estimation for sensorless interior PMSM with signal injection

Position Sensorless Control of Interior Permanent Magnet Synchronous Motor Based on Carrier Frequency Component Method

A Novel Initial Rotor Position Estimation Method for Permanent Magnet Synchronous Motors

Initial Rotor Position Detection of Permanent Magnet Synchronous Motor Based on Oscillating Voltage

Initial Position Estimation for Surface Permanent Magnet Synchronous Motors Based on Magnetic Saturation Effect

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

An in-depth study on initial rotor position estimation of interior permanent magnet synchronous motor based on di/dt principle

Harmonic and Fundamental Rotor Resistance Estimation Scheme for Multiphase Induction Motor Based on Nonsinusoidal Supply Control