Abstract:Aiming at the matter that permanent magnet synchronous machine ( PMSM) with no position sensor cannot start reliably in rotating conditions, two zero-vectors were applied to inverter to make three phase stator windings of the machine had a short-circuit. Through analy-zing the angle variation of the currents in αβ coordinates, the rotational direction and speed of the machine were derived. Furthermore, through analyzing the transient state process of the currents in dq coordinates, the rotor position of the machine was estimated, the relation-ship between the initial speed, the duration of short-circuit and the amplitude of short-circuit current was put out, a start method for PMSM in rotating conditions was offered specifically. The start method mentioned above was evaluated on the experimental platform, which TMS320F28027 provided by TI was used as the master of the whole control system, and a fan was used as the load of PMSM, whose rated power is 550W, the start method was tested under different initial speed and duration of short-circuit conditions. The experimental results show that according to short-circuit currents, the start method designed, can estimate the rotation direction, initial speed and rotor position precisely, thus reliable start of PMSM in rotating conditions can be achieved.

A Novel Initial Rotor Position Estimation Method for Permanent Magnet Synchronous Motors

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Checking method of initial position for surface-mounted permanent magnet linear synchronous motor

Position Sensorless Control of Surface-Mounted PMLSM with a Novel Starting Method

A Novel Start Strategy For Permanent Magnet Synchronous Motor

Initial Rotor Position Detection of Permanent Magnet Synchronous Motor Based on Oscillating Voltage

Initial Rotor Position Detection for Permanent Magnet Synchronous Motor Based on High-Frequency Voltage Injection without Filter

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Start method for PMSM without position sensor in rotating conditions

A precise method to estimate the initial rotor position of IPMSM

An in-depth study on initial rotor position estimation of interior permanent magnet synchronous motor based on di/dt principle

A Neural Network Based Initial Position Detection Method to Permanent Magnet Synchronous Machines

Rotor Incipient Position Detection of Rotor for PMSM Based on High Frequency Current Injection

Full Parameter Estimation for Permanent Magnet Synchronous Motors.

Research and Application of PMSM Rotor Initial Position Detecting Method

A Novel Rotor Position Detection Method for Sensorless Control of Magnetic-Geared Permanent-Magnet Brushless Motor

A Novel Rotor Position-Offset Injection-Based Online Parameter Estimation of Sensorless Controlled Surface-mounted PMSMs

A New Signal Injection-based Method for Estimation of Position in Interior Permanent Magnet Synchronous Motors

Rotor position sensorless estimation for permanent magnet synchronous motors