Abstract:Aiming at the matter that permanent magnet synchronous machine ( PMSM) with no position sensor cannot start reliably in rotating conditions, two zero-vectors were applied to inverter to make three phase stator windings of the machine had a short-circuit. Through analy-zing the angle variation of the currents in αβ coordinates, the rotational direction and speed of the machine were derived. Furthermore, through analyzing the transient state process of the currents in dq coordinates, the rotor position of the machine was estimated, the relation-ship between the initial speed, the duration of short-circuit and the amplitude of short-circuit current was put out, a start method for PMSM in rotating conditions was offered specifically. The start method mentioned above was evaluated on the experimental platform, which TMS320F28027 provided by TI was used as the master of the whole control system, and a fan was used as the load of PMSM, whose rated power is 550W, the start method was tested under different initial speed and duration of short-circuit conditions. The experimental results show that according to short-circuit currents, the start method designed, can estimate the rotation direction, initial speed and rotor position precisely, thus reliable start of PMSM in rotating conditions can be achieved.

Research and Application of PMSM Rotor Initial Position Detecting Method

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

Checking method of initial position for surface-mounted permanent magnet linear synchronous motor

Start method for PMSM without position sensor in rotating conditions

A Novel Start Strategy For Permanent Magnet Synchronous Motor

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Rotor Incipient Position Detection of Rotor for PMSM Based on High Frequency Current Injection

An Improved 3-Step Startup Method Based on Sensorless Vector Control of PMSM

Initial Rotor Position Detection for Permanent Magnet Synchronous Motor Based on High-Frequency Voltage Injection without Filter

Rotor Initial Position Detection of Surface Mounted Permanent Magnet Synchronous Motor Based on Saturation Characteristic

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

A Novel Initial Rotor Position Estimation Method for Permanent Magnet Synchronous Motors

A precise method to estimate the initial rotor position of IPMSM

Investigation of PMSM Back-EMF using Sensorless Control with Parameter Variations and Measurement Errors

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Initial Rotor Position Detection of Permanent Magnet Synchronous Motor Based on Oscillating Voltage

A Robust Magnetic Polarity Self-Sensing Method for Start-Up of Pm Synchronous Machine in Fan-Like System

Initial Rotor Position and Magnetic Polarity Identification of PM Synchronous Machine Based on Nonlinear Machine Model and Finite Element Analysis

INVESTIGATION OF ROTOR SALIENCY-TRACKING BASED SENSORLESS VECTOR CONTROL DRIVE FOR PMSM

Rotor Position Digital Detection for PMSM

The Method of Rotor Position Detection for PMSM