Abstract:In sensorless control of interior permanent magnet synchronous motors (IPMSMs), the fundamental PWM excitation (FPE)-based methods use PWM signals excitation and measure the derivative of the stator current as responses to estimate the rotor position. As the signal injection is no more required, the FPE-based methods have the potential to simplify the controller and achieve precision sensorless servo control. However, the current derivative is hard to measure accurately. Therefore, existing FPE-based methods usually suffer from significant position estimation errors. In this paper, a novel FPE-based rotor position estimation method is proposed with high stability and accuracy. Different from existing methods which usually sample current derivative only 2 times per PWM cycle, the proposed method takes 2 to 6 samples, depending on the amplitude and direction of the voltage vector. To make full use of all recent sample points, a first-in-first-out (FIFO)-based least squares algorithm is proposed. The optimal rotor position estimation can be obtained with only a small amount of computation since the analytical solution is given. Simulation results demonstrate that the rotor position can be estimated with an accuracy of 1 electrical degree under various speed and load. Sensorless closed-loop trajectory tracking control based on the proposed method is realized, which shows an exciting prospect of sensorless control in high-performance servo systems.

Analysis of Rotor Position Estimated Error for IPMSM Using Carrier Frequency Component Method

Initial rotor position estimation of an IPMSM based on PWM inverter carrier frequency component

Analysis of Position Errors in High-Frequency Carrier Signal Injection Based Sensorless Control of PMSM

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Position Sensorless Control of Interior Permanent Magnet Synchronous Motor Based on Carrier Frequency Component Method

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Effect of inductance parameters on the rotor position estimation for IPMSM

A precise method to estimate the initial rotor position of IPMSM

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

An Improved Rotor Speed Estimation Method of IPMSM Drives with Cyclic Fluctuating Load

Investigation of PMSM Back-EMF using Sensorless Control with Parameter Variations and Measurement Errors

Initial rotor position estimation for interior permanent magnet synchronous motor

A New Rotor Position Estimation Method of IPMSM Using All-Pass Filter on High-Frequency Rotating Voltage Signal Injection

Sensorless Operation Of An Inset Pm Bearingless Motor Implemented By The Combination Approach Of Mras And Hf Signal Injectionac

Prediction Error Analysis of Finite-Control-Set Model Predictive Current Control for IPMSMs

Rotor position estimation of PMSM using square-wave voltage injection with asymmetric space vector modulation

Rotor Position Estimation for IPMSM Based on Linear Flux

Initial Rotor Position Estimation Considering Magnetic Cross-Coupling Based on IPMSM

A Novel Fundamental PWM Excitation-Based Rotor Position Estimation Method for Precision Sensorless Control of IPMSMs