Abstract:In this paper,the magnetic saturation model for surface permanent magnet synchronous motors (SPMSMs) is adopted to detect the initial rotor position.The model is also verified by the transient finite element analysis (FEA) method.The proposed algorithm is based on the injection of high-frequency (HF) rotating voltage vector,which produces the HF current response.Then this weak HF current is filtered and amplified significantly via a high pass and resonance filter which can also remove the DC components effectively.After that,an improved demodulation method is introduced to extract the useful information including the negative-sequence DC component and the iron core saturation evaluation function.The rotor direction is then estimated primarily via a phase-locked loop (PLL) with the extracted negative-sequence component and the magnetic polarity is furthermore confirmed via injecting a DC voltage vector at the estimated rotor direction and comparing the saturation evaluation function before and after.Overall the rotor position is estimated with the rotor direction and the magnetic polarity.The proposed initial position algorithm is validated by the 3.6 kW hardware drive system as well as on the Matlab/Simulink simulation platform using the suggested magnetic saturation model.It is proved to be simple,reliable,and with high precision.

Initial rotor position estimation for interior permanent magnet synchronous motor

Initial Rotor Position Estimation for Interior Permanent Magnet Synchronous Motor

Initial rotor position estimation for sensorless interior PMSM with signal injection

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

Initial Rotor Position Detection for Permanent Magnet Synchronous Motor Based on High-Frequency Voltage Injection without Filter

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Initial Rotor Position Estimation Considering Magnetic Cross-Coupling Based on IPMSM

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

A precise method to estimate the initial rotor position of IPMSM

A Novel Start Strategy For Permanent Magnet Synchronous Motor

Initial position estimation for sensorless surface-mounted PMSM with near-zero saliency at standstill

A New Signal Injection-based Method for Estimation of Position in Interior Permanent Magnet Synchronous Motors

Initial rotor position estimation of an IPMSM based on PWM inverter carrier frequency component

An in-depth study on initial rotor position estimation of interior permanent magnet synchronous motor based on di/dt principle

Fast Initial Rotor Position Estimation for IPMSM With Unipolar Sequence-Pulse Injection

Initial Position Estimation for Surface Permanent Magnet Synchronous Motors Based on Magnetic Saturation Effect

Initial Rotor Position Detection of Permanent Magnet Synchronous Motor Based on Oscillating Voltage

A Novel Initial Rotor Position Estimation Method for Permanent Magnet Synchronous Motors

Start method for PMSM without position sensor in rotating conditions

Initial mover position estimation of permanent magnet linear synchronous motor with signal injection method