Abstract:This paper proposes a nonlinear flux linkage observer for the PMSM speed controls without motion sensors, introducing the deviation among the real stator flux linkage and an estimated stator flux linkage to suppress feedback and integral flux drift. In the position detection of an interior PMSM without a speed sensor, the traditional back EMF integration method uses a pure integrator, or LPF, to estimate the stator flux. Its inherent defects inevitably lead to inaccurate flux estimation, which directly affects the estimation of the motor mover position, resulting in the decline in motor control operation and the distortion of phase current. This paper uses an improved integrator with adaptive compensation. The projected value of the stator flux linkage has been derived from the estimated value of the rotor permanent magnetic flux linkage position angle and the algebraic model (m-model) of the stator flux linkage, along with a synchronous coordinate system. The IPMSM stator coil flux linkage obtained from the stator coil current and integral voltage models in the static coordinate system is compared to form a feedback closed-loop to suppress the integral drift, and using the cross-product approach of the actual and estimated flux linkage yields the projected value of the IPMSM rotor speed and position through a PLL. Compared with the existing motion-sensorless observers, the methodology proposed in this article is simple and exhibits better dynamic and static estimation performance. Extensive and comprehensive MATLAB computer simulation and experimental findings validate the proposed motion-sensorless control mechanism.

Permanent Magnet Linear Synchronous Motor Mover Position Estimation at Zero and Low Speed Using Eddy Current Loss Equivalent Resistance

Position Sensorless Control of Surface-Mounted PMLSM with a Novel Starting Method

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Checking method of initial position for surface-mounted permanent magnet linear synchronous motor

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

FEM Analysis and Application of Saturation Effect PMLSM Winding Inductance

Sensorless Mover Position Estimation of Permanent Magnet Linear Synchronous Motor

Analysis of Position Errors in High-Frequency Carrier Signal Injection Based Sensorless Control of PMSM

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Initial mover position estimation of permanent magnet linear synchronous motor with signal injection method

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Current Ripple Sampling based Angle Error Compensation for High-speed Permanent Magnet Synchronous Motor Sensorless Control Considering Inductance Saturation

Initial mover position estimation of permanent magnet linear synchronous motor with signal injection method | Określanie pocza{ogonek}tkowej pozycji elementu ruchomego w silniku liniowym synchronicznym metoda{ogonek} wstrzykiwania sygnału

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

Sensorless position estimation of Permanent-Magnet Synchronous Motors using a saturation model

Back EMF-Based Dynamic Position Estimation in the Whole Speed Range for Precision Sensorless Control of PMLSM

Rotor Speed and Position Estimation Analysis of Interior PMSM Machines in Low and Medium-High Speed Regions Adopting an Improved Flux Observer for Electric Vehicle Applications

Estimated Position Error Compensation Method Considering Impact of Speed and Load in Permanent Magnet Synchronous Motor Position Sensorless Control Based on High-Frequency Voltage Injection