Abstract:Initial position is one of the key points in the permanent magnet synchronous machine (PMSM) senseless control. This paper presents a neural network method with currents difference as its inputs and the rotor position angle as its outputs. 256 different 100mus-width voltage vector pulse pairs injects into stator before position calculation. The voltage vector direction distributes symmetrically around an electrical cycle. So 256 current pairs can be obtained. Because of the saturation of the stator, the positive and negative vector pulses have different current responses. 256 current difference data can be got. As there's much noise in the data a neural network is introduced. 256 current difference data are used as the inputs of the neural network, and the electrical angle the rotor position is the outputs. A direct torque controlled (DTC) PMSM experimental system with the proposed initial position detecting method is set up. The scheme is verified by the experimental system with a 600w PMSM. The simulation and experimental results show that the scheme presented in the paper is available to get the initial position with 5.6% error and able to start a PMSM successfully

Initial mover position estimation of permanent magnet linear synchronous motor with signal injection method | Określanie pocza{ogonek}tkowej pozycji elementu ruchomego w silniku liniowym synchronicznym metoda{ogonek} wstrzykiwania sygnału

Permanent Magnet Linear Synchronous Motor Mover Position Estimation at Zero and Low Speed Using Eddy Current Loss Equivalent Resistance

Initial mover position estimation of permanent magnet linear synchronous motor with signal injection method

Checking method of initial position for surface-mounted permanent magnet linear synchronous motor

A Novel Estimation Method of Sensorless Initial Rotor Position for Surface-mounted PMLSM

Position Sensorless Control of Surface-Mounted PMLSM with a Novel Starting Method

High-Frequency Signal Injection-Based Sensorless Control for Dual-Armature Flux-Switching Permanent Magnet Machine

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

FEM Analysis and Application of Saturation Effect PMLSM Winding Inductance

Analysis of Position Errors in High-Frequency Carrier Signal Injection Based Sensorless Control of PMSM

A New Signal Injection-based Method for Estimation of Position in Interior Permanent Magnet Synchronous Motors

A Novel Start Strategy For Permanent Magnet Synchronous Motor

Initial Rotor Position Detection for Permanent Magnet Synchronous Motor Based on High-Frequency Voltage Injection without Filter

Sensorless Operation of an Inset PM Bearingless Motor Implemented by the Combination Approach of MRAS and HF Signal Injection

Fast Initial Rotor Position Estimation for IPMSM With Unipolar Sequence-Pulse Injection

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Robust Initial Rotor Position Estimation of Permanent-Magnet Brushless AC Machines with Carrier-Signal-Injection-Based Sensorless Control

A Novel Initial Rotor Position Estimation Method for Permanent Magnet Synchronous Motors

Sensorless Mover Position Estimation of Permanent Magnet Linear Synchronous Motor

Initial Rotor Position Detection of Permanent Magnet Synchronous Motor Based on Oscillating Voltage

A Neural Network Based Initial Position Detection Method to Permanent Magnet Synchronous Machines