Abstract:Both upward‐bending and downward‐bending nano‐kirigami structures with well‐defined dimensions in nanoscale and controllable bending degree are fabricated with light ion beam milling and broadly heavy‐ion beam irradiation. Tilted, bent and branched nanowires (NWs) are also easy to fabricate on these bending structures using ion beam‐induced deposition, local ion irradiation on NWs, and two‐step deposition methods. 3D nanostructures hold the key to building custom devices with special and flexible functionalities. Ion beam‐induced bending and folding are used for the fabrication of 3D nanostructures from prepared 2D nano‐patterned membranes. Tensile and compressive stresses can be introduced within the layers of a thin membrane under ion beam irradiation to manipulate and control the formation of nano‐kirigamis. Both localized and broader ion beam irradiation can be used to induce bending in the membrane with remarkable control of the bending angle and direction. In this work, an approach to fabricate nano‐kirigamis with focused ion beams (FIBs) is developed. First, helium or neon ion beams are used to mill 2D patterns into the planar membrane with good accuracy, nanoscale, and less damage. Subsequently, gallium ion beam is used to broadly and uniformly irradiate the patterned region to induce out‐of‐plane bending to form nano‐kirigamis. Both upward and downward bending are observed for different thicknesses of membranes. The bending angle is easily controlled by varying the irradiation dosage. Moreover, with FIB‐induced deposition, nanopillars, or nanowires (NWs) can be grown on the membrane before or after bending. Various complex 3D nanostructures and branched NWs can be fabricated using this approach.

Ultra-fine Nanofabrication by Hybrid of Energetic Ion Induced Fluidization and Stress

Focused-ion-beam stress introducing technology for micro/nano-fabrications

Fabrication Of Suspended Periodic Nanostructure By Focused Ion Beam Induced Material Migration And Rayleigh-Plateau Instability

3D Nanohelix Fabrication and 3D Nanometer Assembly by Focused Ion Beam Stress-Introducing Technique

Focused-ion-beam-introduced Stress As a Driving Force for Three-Dimensional Micro/nano-Assembly

Focused-Ion-Beam Induced Rayleigh-Plateau Instability for Diversiform Suspended Nanostructure Fabrication

Stress-assistant selective etching mechanism for lithography-independent nanofabrication

A Programmable Nanofabrication Method for Complex 3D Meta-Atom Array Based on Focused-Ion-Beam Stress-Induced Deformation Effect

Three-Dimensional in Situ Electron-Beam Lithography Using Water Ice.

Fabrication of anisotropic nanomaterial by precise and large-area nanowire operation with focused-ion-beam

Fabrication of Metal Suspending Nanostructures by Nanoimprint Lithography (NIL) and Isotropic Reactive Ion Etching (RIE)

Solvent-Free Nanofabrication Based on Ice-Assisted Electron-Beam Lithography.

Fabrication of Ultrafine Nanostructures

Atomic layer deposition ultrathin film origami using focused ion beams

Silicon-Based Suspended Structure Fabricated by Femtosecond Laser Direct Writing and Wet Etching

Fabrication of Nanoarms and Nanotips Via Focused Ion Beam Milling

The 3D Controllable Fabrication of Nanomaterials with FIB-SEM Synchronization Technology

3‐D Nanofabrication of Silicon and Nanostructure Fine‐Tuning via Helium Ion Implantation

Fabrication of Micro and Nanostructures by Focused Ion Beam

Nano‐Kirigami Structures and Branched Nanowires Fabricated by Focused Ion Beam‐Induced Milling, Bending, and Deposition

Low-voltage-exposure-enabled Hydrogen Silsesquioxane Bilayer-Like Process for Three-Dimensional Nanofabrication