Effect of external wind temperature to micro-scale flame

ZHOU Jun-hu,Yang Wang,YANG Wei-juan,LIU Jian-zhong,WANG Zhi-hua,CEN Ke-fa

DOI: https://doi.org/10.3785/j.issn.1008-973X.2011.01.025

2011-01-01

Abstract:The surface heat loss of a micro combustor was controlled by the external wind temperature and the performances of the combustor under different wind temperatures were compared in order to analyze the stability of micro combustor affected by the heat loss. The flow rates of fuel mixture were 0.12, 0.24, 0.36 L/min. The wind temperatures were adjusted to 277.15, 380.15, 635.15, 790.15 and 1 001.15 K. Experimental results show that increasing the wind temperature or fuel-mixture flow rate can inhibit the extinction. The surface temperatures of the combustor at different conditions were measured. The numerical simulation was applied to investigate the internal combustion process. Results showed that the higher wind temperature made the reaction temperature increase and the reaction region shift upstream. At 0.24 L/min and stoichiometric condition, the peak temperature increased by 165 K and the reaction region shifted upstream by 5 mm while the wind temperature increased from 277.15 K to 1001.15 K. Accordingly, high wind temperature intensifies the reaction rate, thus inhibites extinction. The heat loss increased while the flow rate increased from 0.12 to 0.36 L/min. But the ratio of heat loss to total energy decreased, which indicated that increasing fuel-mixture flow rate can inhibit extinction.