Abstract:Through experiment and numerical modeling, this study investigated the establishment of moderate or intense low-oxygen dilution (MILD) combustion in a laboratory-scale furnace when fuel and air are fully premixed (FP), partially premixed (PP), or non-premixed (NP). Experiments were carried out at firing rates from 7.5 to 15 kW and equivalence ratios (Phi) ranging from 0.5 to 1. The furnace thermal fields and exhaust NOx emissions for the three mixing patterns were compared. Validated computational fluid dynamics was used to aid in better understanding the flow and compositional structures in the furnace. Natural gas was used as the fuel. The eddy dissipation concept (EDC) model and the GRI-Mech 3.0 mechanism were used. Additional chemical kinetics calculations were also performed to examine reaction pathways under the MILD combustion regime. Moreover, the characteristics of the reaction regime of MILD combustion were examined and are discussed in detail. Estimation of the initial jet momentum rate (I) showed that J(FP) > J(NP) > J(PP), and consistently the recirculating rate of internal flue gas (K-v) was found to be in the order K-v,K- FP > K-v,K-NP > K-v,K- PP. Correspondingly, the highest values of both furnace temperature and NOx emission were experimentally measured in the PP case, while the lowest values were found in the FP case. The measured NOx emission was negligibly low for the FP case. Numerical results revealed that in all the three cases of firing natural gas (FP, PP, NP), more than 80% of the total NOx formation results from the N2O intermediate route while other NOx mechanisms are unimportant. As Phi is increased from 0.5 to 1.0, both the measured and simulated NOx emissions in the three cases initially increase and then decrease. Moreover, for Phi > 0.9, the NOx-reburning reaction becomes significant and the resulting reduction of NOx is notable. The rates of both turbulent mixing and chemical reaction were found to play a significant role in the structure and establishment of MILD combustion, with estimated Damkohler numbers in the range Da = 0.01-5.35.

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Impact of injection conditions on flame characteristics from a parallel multi-jet burner

Assessment of turbulence-chemistry interaction models in MILD combustion regime

MILD Combustion under Different Premixing Patterns and Characteristics of the Reaction Regime

Premixed moderate or intense low-oxygen dilution (MILD) combustion from a single jet burner in a laboratory-scale furnace

Characteristics of Premixed Mild Combustion of a Single Jet Burner in a Laboratory-scale Furnace

Modified Vitiation in A Moderate or Intense Low-Oxygen Dilution (mild) Combustion Furnace

Stability and emission characteristics of nonpremixed MILD combustion from a parallel-jet burner in a cylindrical furnace

Experimental and Numerical Study of MILD Combustion in a Bench-Scale Natural Gas Partial Oxidation Gasifier

Influences of Reactant Injection Velocities on Moderate or Intense Low-Oxygen Dilution Coal Combustion

Influence of Inlet Dilution of Reactants on Premixed Combustion in a Recuperative Furnace

Numerical Analysis on the Characteristic Chemical Time Scale and Combustion Regime of Natural Gas MILD Combustion

Numerical Simulation of Flameless Premixed Combustion with an Annular Nozzle in A Recuperative Furnace

Premixed MILD Combustion of Propane in a Cylindrical Furnace with a Single Jet Burner: Combustion and Emission Characteristics

Diffusion MILD Combustion of Firing Pulverized-coal at a Pilot Furnace

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

MILD combustion of methane in a model combustor with an inverse-diffusion flame configuration

Effect of thermal input, excess air coefficient and combustion mode on natural gas MILD combustion in industrial-scale furnace

Effect of fuel type on the MILD combustion of syngas

MILD oxy-combustion of gaseous fuels in a laboratory-scale furnace

Comparison of Different Global Reaction Mechanisms for MILD Combustion of Natural Gas