Abstract:The utilization of low calorific value gases (LCVG) in combustion devices presents particular challenges in terms of ignition and sustained combustion stability due to the presence of non-combustible components. Moderate or intense low-oxygen dilution (MILD) combustion has emerged as a promising technology for LCVG combustion, offering numerous advantages such as high combustion efficiency, reduced pollutant emissions, and increased fuel flexibility. However, the current body of research in this area is fragmented, making it challenging to draw meaningful comparisons between studies and hindering its practical application. This paper provides a comprehensive review of conventional and MILD combustion of LCVG. To understand the impact of composition on combustion, the fuels are classified based on their composition of hydrogen, carbon monoxide, methane, carbon dioxide, nitrogen, and water. We also delve into the chemical and physical effects of composition, including reaction kinetics and turbulence mixing, and provide an overview of the burners and methods used in establishing MILD combustion. Furthermore, computational fluid dynamics (CFD) models and chemical kinetics in MILD combustion are also thoroughly discussed.The presence of a large amount of dilution gas in LCVG increases the self-ignition temperature and ignition delay time of the mixture, making preheating the reactants a critical consideration. In MILD combustion, it is crucial to have an inlet reactant temperature higher than the self-ignition temperature (Tin>Tsi) to mitigate the difficulties associated with ignition and unstable combustion. The heat release in MILD combustion should be moderate to ensure that the combustion temperature does not become too high. The non-combustible components of LCVG are beneficial in this regard, as they allow for a temperature increase of less than the self-ignition temperature (ΔT<Tsi). Hydrogen is the most reactive component in LCVG, and its content directly impacts the establishment, efficiency, and pollutant emissions of MILD combustion. Carbon dioxide, nitrogen, and water act as diluents, helping to reduce NOx emissions in MILD combustion. Although a burner may have the potential to be used for MILD combustion, it must be optimised for LCVG with variable composition in order to achieve the lowest pollutant emissions. Further research is necessary to verify and improve simulation models and chemical kinetics. This article provides theoretical support for the practical application of MILD combustion of LCVG with variable composition.

MILD combustion of methane in a model combustor with an inverse-diffusion flame configuration

MILD Combustion under Different Premixing Patterns and Characteristics of the Reaction Regime

CFD and Kinetic Modelling Study of Methane MILD Combustion in O2/N2, O2/CO2 and O2/H2O Atmospheres

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

MILD Combustion of Natural Gas Using Low Preheating Temperature Air in an Industrial Furnace

MILD combustion of a premixed NH3/air jet flame in hot coflow versus its CH4/air counterpart

Experimental study on MILD combustion of methane under non-preheated condition in a swirl combustion furnace

Premixed moderate or intense low-oxygen dilution (MILD) combustion from a single jet burner in a laboratory-scale furnace

Experimental and Numerical Study of MILD Combustion in a Bench-Scale Natural Gas Partial Oxidation Gasifier

Moderate Or Intense Low-Oxygen Dilution Combustion Of Methane Diluted By Co2 And N-2

Progress and recent trend in MILD combustion

Experimental and Numerical Study on Moderate or Intense Low-Oxygen Dilution Oxy-Combustion of Methane in a Laboratory-Scale Furnace under N2, CO2, and H2O Dilutions

Diffusion MILD Combustion of Firing Pulverized-coal at a Pilot Furnace

Experimental investigation of the characteristics of combustion in the full hydrogen blending range of methane-hydrogen mixtures in a MILD model combustor

Numerical Research for MILD Burners with Different Configurations

MILD Combustion of Low Calorific Value Gases

Methane Combustion in Mild Oxyfuel Regime: Influences of Dilution Atmosphere in Co-Flow Configuration

Effect of thermal input, excess air coefficient and combustion mode on natural gas MILD combustion in industrial-scale furnace

MILD Combustion of Solid Fuels: Its Definition, Establishment, Characteristics, and Emissions

Numerical study of fuel-NO formation and reduction in a reversed flow MILD combustion furnace firing ammonia-doped methane

MILD Combustion Versus Conventional Bluff-Body Flame of a Premixed CH4/air Jet in Hot Coflow