Abstract:Through experiment and numerical modeling, this study investigated the establishment of moderate or intense low-oxygen dilution (MILD) combustion in a laboratory-scale furnace when fuel and air are fully premixed (FP), partially premixed (PP), or non-premixed (NP). Experiments were carried out at firing rates from 7.5 to 15 kW and equivalence ratios (Phi) ranging from 0.5 to 1. The furnace thermal fields and exhaust NOx emissions for the three mixing patterns were compared. Validated computational fluid dynamics was used to aid in better understanding the flow and compositional structures in the furnace. Natural gas was used as the fuel. The eddy dissipation concept (EDC) model and the GRI-Mech 3.0 mechanism were used. Additional chemical kinetics calculations were also performed to examine reaction pathways under the MILD combustion regime. Moreover, the characteristics of the reaction regime of MILD combustion were examined and are discussed in detail. Estimation of the initial jet momentum rate (I) showed that J(FP) > J(NP) > J(PP), and consistently the recirculating rate of internal flue gas (K-v) was found to be in the order K-v,K- FP > K-v,K-NP > K-v,K- PP. Correspondingly, the highest values of both furnace temperature and NOx emission were experimentally measured in the PP case, while the lowest values were found in the FP case. The measured NOx emission was negligibly low for the FP case. Numerical results revealed that in all the three cases of firing natural gas (FP, PP, NP), more than 80% of the total NOx formation results from the N2O intermediate route while other NOx mechanisms are unimportant. As Phi is increased from 0.5 to 1.0, both the measured and simulated NOx emissions in the three cases initially increase and then decrease. Moreover, for Phi > 0.9, the NOx-reburning reaction becomes significant and the resulting reduction of NOx is notable. The rates of both turbulent mixing and chemical reaction were found to play a significant role in the structure and establishment of MILD combustion, with estimated Damkohler numbers in the range Da = 0.01-5.35.

Premixed moderate or intense low-oxygen dilution (MILD) combustion from a single jet burner in a laboratory-scale furnace

Characteristics of Premixed Mild Combustion of a Single Jet Burner in a Laboratory-scale Furnace

MILD Combustion under Different Premixing Patterns and Characteristics of the Reaction Regime

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Influence of Inlet Dilution of Reactants on Premixed Combustion in a Recuperative Furnace

Importance of Initial Momentum Rate and Air-Fuel Premixing on Moderate or Intense Low Oxygen Dilution (mild) Combustion in A Recuperative Furnace

Premixed MILD Combustion of Propane in a Cylindrical Furnace with a Single Jet Burner: Combustion and Emission Characteristics

Stability and emission characteristics of nonpremixed MILD combustion from a parallel-jet burner in a cylindrical furnace

MILD combustion of methane in a model combustor with an inverse-diffusion flame configuration

Assessment of turbulence-chemistry interaction models in MILD combustion regime

Modified Vitiation in A Moderate or Intense Low-Oxygen Dilution (mild) Combustion Furnace

Impact of injection conditions on flame characteristics from a parallel multi-jet burner

Numerical Simulation of Flameless Premixed Combustion with an Annular Nozzle in A Recuperative Furnace

Experimental And Numerical Study On Moderate Or Intense Low-Oxygen Dilution Oxy-Combustion Of Methane In A Laboratory-Scale Furnace Under N-2, Co2, And H2o Dilutions

MILD oxy-combustion of gaseous fuels in a laboratory-scale furnace

Influences of Reactant Injection Velocities on Moderate or Intense Low-Oxygen Dilution Coal Combustion

Diffusion MILD Combustion of Firing Pulverized-coal at a Pilot Furnace

Nonpremixed MILD Combustion in a Laboratory-Scale Cylindrical Furnace: Occurrence and Identification

Moderate Or Intense Low-Oxygen Dilution Combustion Of Methane Diluted By Co2 And N-2

Effect of thermal input, excess air coefficient and combustion mode on natural gas MILD combustion in industrial-scale furnace

Moderate or Intense Low-Oxygen Dilution Oxy-combustion Characteristics of Light Oil and Pulverized Coal in a Pilot-Scale Furnace