Modified Vitiation in A Moderate or Intense Low-Oxygen Dilution (mild) Combustion Furnace
J. Mi,F. Wang,P. Li,B. B. Dally
DOI: https://doi.org/10.1021/ef201161x
IF: 4.6541
2011-01-01
Energy & Fuels
Abstract:This paper reports on the effects of various operational and geometric parameters on mixing and vitiation in a laboratory-scale furnace operating with natural gas and under the moderate or intense low-oxygen dilution (MILD) regime. The study is carried out through numerical modeling. Seven independent parameters are considered: i.e., mass fraction (f) of fuel diluents (CO2 and N-2), air preheat temperature (T-a), global equivalence ratio (phi), air nozzle exit diameter (D-a), fuel nozzle exit diameter (D-f), fuel air nozzles separation distance (S), and fuel injection angle from the furnace floor (alpha). The modeling is initially verified through a comparison to measurements by Szego et al. (Szego, G. G.; Dally, B. B.; Nathan, G. J. Combust. Flame 2008, 154, 281-295) in the same furnace geometry. It is shown that varying each of the parameters f, phi, D-a, D-f, S, and alpha can considerably influence the fuel-jet penetration distance and the recirculation rate of the exhaust gas, two important quantities for establishing the MILD combustion. Relatively, the geometric parameters D-a, D-f, S, and alpha play more effective roles in controlling the vitiation rate and, hence, "flame" characteristics. Also, it is revealed that influences of all of the parameters, except S, and alpha, can be represented by that of the ratio of the fuel injection momentum to the air injection momentum.