Abstract:Ammonia is a zero-carbon candidate fuel for the decarbonization of internal combustion (IC) engines. A concern when using ammonia in IC engines is the increased emissions of nitrogen oxides (NOX), due to the additional nitrogen in the ammonia molecule. Compared to conventional petroleum such as gasoline and diesel, ammonia combustion adds the fuel NOX formation mechanism in addition to the original thermal NOX generation pathway, which further complicates the NOX emission characteristics of ammonia engines. Decoupling fuel NOX and thermal NOX helps to increase the understanding of the formation and evolutionary characteristics of nitrogen oxides occurring inside ammonia engines, but the available literature lacks studies in this respect. The purpose of this study is to fill this research gap and to propose a methodology for decoupling fuel NOX and thermal NOX. In brief, an artificial elemental nitrogen is applied to the Zeldovich mechanism and to the diatomic nitrogen in the combustion air, which allows the formation of NOX from the elemental nitrogen in the ammonia fuel to be separated from the NOX formed from the nitrogen in the air. A three dimensional (3D) computational fluid dynamics (CFD) model demonstrates the effectiveness of this approach and investigates the spatial and temporal distribution characteristics of thermal NOX and fuel NOX in the turbulent combustion field of ammonia engines. The in-cylinder activity analysis suggests that this separation of the NOX formation mechanism slightly alters the nitrogen-based chemistry, which is unavoidable. However, this approach still allows a reasonable characterization of the formation and evolution of fuel NOX and thermal NOX. The simulations show that fuel NOX is formed during ammonia oxidation because fuel NOX is an intermediate species, while thermal NOX has a high concentration in the burned zone because it is related to the temperature and the residence time of nitrogen at that temperature, both of which are expected and support the successful decoupling of fuel and atmospheric nitrogen. In addition, nitrous oxide (N2O) emissions come from the fuel NOX mechanism and are mainly distributed along the liner walls as it is formed by partial oxidation of ammonia released from the crevices during the late oxidation process. Moreover, the concentrations of both thermal and fuel-based nitrogen monoxide vary with the chemical equilibrium that changes with piston motion, and their concentrations are always comparable. As a result, combustion strategies for ammonia internal combustion engines needs to consider both thermal and fuel NOX reduction mechanisms, where the main difficulty is the N2O reduction. Catalytic combustion mode may be a viable strategy to improve the oxidation efficiency of the ammonia fuel trapped in the crevice and reduce N2O emissions in the cylinder.

Numerical study of fuel-NO formation and reduction in a reversed flow MILD combustion furnace firing ammonia-doped methane

Experimental study and mechanism analysis of the NOx emissions in the NH3 MILD combustion by a novel burner

Mechanisms of NO Formation in MILD Combustion of CH 4 /H 2 Fuel Blends

MILD Combustion under Different Premixing Patterns and Characteristics of the Reaction Regime

Numerical analysis of NOx formation mechanisms and emission characteristics with different types of reactants dilution during MILD combustion of methane and coke oven gas

MILD combustion of a premixed NH3/air jet flame in hot coflow versus its CH4/air counterpart

Quantitative evaluation of NO formation and destruction routes during methane MILD combustion using an improved calculation method

MILD combustion of methane in a model combustor with an inverse-diffusion flame configuration

Numerical Study on Nitric Oxide Production of Moderate or Intense Low-Oxygen Dilution Combustion Using Ammonia and City Gas

Ammonia/syngas MILD combustion by a novel burner

Numerical simulation of propane MILD combustion in a lab-scale cylindrical furnace

Experimental And Numerical Study On Moderate Or Intense Low-Oxygen Dilution Oxy-Combustion Of Methane In A Laboratory-Scale Furnace Under N-2, Co2, And H2o Dilutions

NO formation and reduction during methane/hydrogen MILD combustion over a wide range of hydrogen-blending ratios in a well-stirred reactor

Formation and Evolution of Thermal and Fuel Nitrogen Oxides in the Turbulent Combustion Field of Ammonia Internal Combustion Engines

Numerical Simulation of Flameless Premixed Combustion with an Annular Nozzle in A Recuperative Furnace

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Influence of Inlet Dilution of Reactants on Premixed Combustion in a Recuperative Furnace

Experimental study on MILD combustion of methane under non-preheated condition in a swirl combustion furnace

Effect of thermal input, excess air coefficient and combustion mode on natural gas MILD combustion in industrial-scale furnace

Premixed moderate or intense low-oxygen dilution (MILD) combustion from a single jet burner in a laboratory-scale furnace

Moderate Or Intense Low-Oxygen Dilution Combustion Of Methane Diluted By Co2 And N-2