Simulation and Heat Loss Study of the Premixed Combustion of H2/Air

刘茂省,杨卫娟,周俊虎,周志军,张永生,岑可法

DOI: https://doi.org/10.3321/j.issn:1006-8740.2008.03.012

2008-01-01

Abstract:The combustion of H2/air in the tube with a 2 mm outer diameter was simulated using the 20-step reaction mechanism.The H2/air flame spreads from the wall to the center of the combustor,and the shape of flame is conic.Along the direction in which the gas flows,the shape of the section temperature curves in the combustion area changes from U to M,then to handstand-U,which are separately corresponding to the gas's heating,the flame's spreading and the heat losing.The heat loss of the microcombustor is very great,about 10% of the input heat.5% of the heat loss is at the combustion zone,and 80%—90% is radiant heat loss.So the material with low radiation emissivity is beneficial for reducing heat loss and stabilizing the flame.For microcombustion,the heat loss increases with the thickness of the burner wall increasing.The wall temperature of the microcombustor entrance doesn't change monotonously with the heat conductivity and the thickness of the wall.When the wall heat conductivity is 3~20 W/(m·K) and the wall thickness is 1 mm,the wall temperature of the combustor entrance is comparatively high,which is favorable for the stabilization of the flame.