Temperature and Heat-recirculation Distribution in Micro-scale Combustion

YANG Wei-juan,ZHOU Jun-hu,WANG Yang,HUANG Zhen-yu,LIU Jian-zhong,CEN Ke-fa
DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2010.20.012
2010-01-01
Abstract:This paper researches on stoichiometric combustion of a hydrogen/air mixture in a quartz tube with 2 mm inner diameter,in terms of temperature distribution,temperature gradient,heat recirculation and its effect on reheating incoming flow with a combination approach of experimental measures and numerical simulations..In the inlet section of the tube,the temperature of the tube's outer wall changes little with the hot wind temperature from atmosphere and the flow rate of hydrogen/air mixture;while the maximum value of the temperature raises obviously with the increase of the hot wind and the flow rate.The heat recirculation zone in the tube's outer wall extends with the flow rate of the mixture.The temperature of tube's inner wall falls down along the radial direction in the combustion region with the gradient up to 105 K/m,which leads to stronger heat recirculation.In the tube burner,the position where the gas temperature is maximum in the radial section moves from the outer to the inner along axial direction until it moves to the center in the combustion region and the temperature gradient of the gas is up to 106 K/m.The energy which reheats the unburned gas in the inlet section and the combustion section is mainly obtained from the heat recirculation of upstream flame,the preheating of the outboard hotter gas and the outboard flame.The energy of the prior two conditions is generated from the heat recirculation of the flow gas and the tube wall.
What problem does this paper attempt to address?