Abstract:A previous study on quenching and partitioning (QP) steel showed that the transformation-induced plasticity (TRIP) effect strongly depends on the stress triaxiality and Lode angle parameters during the plastic deformation. However, only the impact of stress states on the linear hardening response (first-order effect) was investigated, assuming its yield and plastic flow evolution (second-order effect) follow isotropic behavior for both tension and compression. The high-order effects of phase transformation on plasticity are still elusive and difficult to incorporate owing to the inconsistent usage of the equivalent strain in kinetics law and constitutive modeling. In this study, the hardening law, considering martensitic transformation, was utilized in conjunction with a strength differential (SD) effect-induced asymmetric yield function based on the proposed work-conjugate framework. The contradiction where the previous model correlates the martensitic transformation law based on the von Mises strain and the mechanical responses based on the normalized plastic work-per-unit material (or the work-conjugate equivalent strain) was eliminated. This elimination imposed the phase transformation influence into size evolution of the yield surface for QP980 because the effective stress directly correlated with the martensitic transformation using the work-conjugate equivalent strain. One can use any yield function in conjunction with this work-conjugate framework to correlate the martensitic transformation and its impact on the mechanical behavior for both first- and second-order effects. Thus, the yield surface of QP980 steel was stably normalized through asymmetric function under different plastic strains and deformation modes. The SD effect of QP980 steel has proven to be anisotropic and the martensitic transformation has negligible impact on the shape evolution of its yield surface. The pressure-dependent phenomenon in the plastic flow behavior of the employed QP steel suggested that its volume change during the plastic deformation can be neglected. The correlation between the microstructure volume fraction, evolving yield surface, and the stress–strain response under nonlinear loadings (Bauschinger effect) was predicted accurately. The forming limit imperfection analysis served as a typical application, where the phase transformation was further correlated with the localized necking phenomenon. The framework to understand the impact of microstructure evolution in QP steel sheets on its final forming limits was provided, suggesting that an optimized strain path design will greatly enhance the accumulated plastic limit before the localized necking.

Investigation on the TRIP Steel Sheet Forming Processes with respect to Punch Speed Loading-Paths

Study on TRIP Effect of X65 Pipeline Steel

Research on the Mechanism and Processability of Roll Forming

Prediction of mechanical properties of TRIP590 steel with strain rate effect

Rheological Behavior of TRIP600 Steel during Deformation

Investigation on the Factors Influencing the Thickness Distribution of Superplastic-Formed Components

Preliminary Studies on Strain Rate Dependence of Laser Shock Forming

Die Structure Analysis Of Stress Distribution During High-Strength Steel Stamping Process And Experimental Validation

Experimental and Numerical Thickness Analysis of TRIP Steel under Various Degrees of Deformation in Bulge Test

Analysis of TRIP Steel HCT690 Deformation Behaviour for Prediction of the Deformation Process and Spring-Back of the Material via Numerical Simulation

Influence of movement tracks on the forming quality of profiles fabricated by flexible stretch bending of multi-point roller dies technology

Technology Optimization Analysis of Three-Roll Rotary Piercing Process for Seamless Steel Pipe

Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction

Analysis of the Stamping Speed for Sheet Metal Forming of Aluminum Alloy 5052-H112

Effect of the Load Path on Formability of T-Shaped Tube Hydroforming

Investigation of the clinching process with rectangle punch

Experimental and numerical investigation of novel toolpaths on forming quality in DSIF

Research on the effects of machining paths and variable parameters of different passes on defects in multi-pass single-point incremental forming

Research on the Micro Sheet Stamping Process Using Plasticine as Soft Punch

Effect of discrete roller dies on the contour accuracy of profiles in multi-point flexible stretch-bending forming

Investigation on the Structure Profile of Precise Copper Tube by Three-Roll Planetary Rolling Based on Finite Element Simulation Assisted by Machine Learning