Abstract:Lock-in thermography (LIT) is a type of active thermography capable of detecting and evaluating the subsurface defects in composite materials. The phase or amplitude difference between the defect and sound regions can quantitatively determine the size and depth of defects. One limitation of LIT is that the optimal identification of defects located at specific depths is dispersed within phase images acquired at varying excitation frequencies. If the depth of the defects within the specimen is unknown, it is difficult to determine the excitation frequencies to achieve optimal contrast for all defects and display them in a single image. To address this challenge, a multi-frequency fused method based on lock-in thermography is proposed to improve the quality of defect detection. Initially, the optimal thermal wave excitation frequencies and the number of detection times are determined based on the theoretical solution. Subsequently, phase images at various excitation frequencies are extracted and enhanced using a specified scheme. Finally, we develop an unsupervised encoder-decoder network that combines dense connections and residual modules to fuse these phase images into a single image containing defects at various depths. An experiment is conducted to detect carbon fiber reinforced polymer (CFRP) laminate containing defects with different depths and sizes. The results demonstrate that the proposed method can broaden the detection range of defect depths and improve the quality of the inspected images, providing superior performance compared to traditional sequential image processing methods.

Study on Full-Field Stress Analysis for Composite Material Structure Using Lock-In Thermography

The Study on Stress Analysis of Compound Steel-Foam-Glass Fiber Reinforced Polymer (gfrp) Structure by Lock-In Thermography

Research on the Structure Stress Analysis Based on IR Lock-in Thermography

Integrated Fbg Sensor Responses And Full Field Thermo-Electric Stress Approach To Monitor Damage Accumulation In Glass Fibre Reinforced Composite Plate

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Experimental study on defects detection in GFRP laminates using lock-in infrared thermography technology

Inverse Heat Transfer Approach for Nondestructive Estimation the Size and Depth of Subsurface Defects of CFRP Composite Using Lock-in Thermography

Inspection Of Defects In Cfrp-Foam Layered Structure Composite Plates Of Aerospace Materials Using Lock-In Thermography

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Investigation on stress distribution of multilayered composite structure (MCS) using infrared thermographic technique

Visualization and Quantification of the Stress Distribution on Epoxy Resin Through Photoelasticity and Infrared Radiation Techniques

The fusion of lock-in phase images for the damage investigation in composites materials

A novel force-temperature model for evaluating internal forces in CFRP by means of infrared thermography

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

Theoretical and Experimental Study on Carbon/epoxy Facings-Aluminum Honeycomb Sandwich Structure Using Lock-in Thermography

A comparative study of whole-field stress between digital photoelasticity and infrared radiation testing applied for PMMA

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography

A Comparison among Different Ways to Investigate Composite Materials with Lock-In Thermography: The Multi-Frequency Approach

Thermophysical Properties Mapping of Composites by Lock-in Thermography: Applications on Carbon Fiber Reinforced Plastics

Theoretical and Experimental Studies on Residual Stresses of Advanced Polymer Composites