Abstract:To enable the success of solid-state stamp forming of unidirectional fibre reinforced thermoplastics (UD FRTPs), it is essential to accurately characterise and model the material deformation under desired conditions. This paper comprehensively investigates the intra-ply tensile and shear properties of unidirectional carbon fibre reinforced polyamide 6 (UD CF/PA6), which is a type of commonly used UD FRTP. To accomplish this, tensile and V-Notched Rail (VNR) shear tests are conducted for characterising the intra-ply transverse tensile and longitudinal shear properties, respectively. The temperature effects (180 – 220 °C, at 0.01 /s for the transverse tensile deformation and at 0.04 /s for longitudinal shear deformation) and strain-rate effects (0.001 – 0.25 /s for transverse tensile deformation and 0.004 – 0.4 /s for the longitudinal shear deformation, both are at 200 °C) are studied. It is found that temperature has significant effects on the intra-ply deformation properties, while the strain-rate effects are marginal. This paper also proposes a new physically based constitutive model considering all the deformable constituents, i.e., the polymer constituent reinforced by fibres (PrF) and the polymer-fibre interface (P-F). This model not only shows good prediction of the thermomechanical properties of UD CF/PA6 under intra-ply deformations, but also gives insights into the deformation mechanisms. The new physically based constitutive model is successfully embedded into Finite Element Analysis (FEA) software and validated through accurate prediction of intra-ply deformation of a CF/PA6 specimen under bias-extension. The methodologies and model developed here offer an effective tool for predicting the intra-ply deformation behaviours and guiding the solid-state stamp forming process of UD FRTPs.

A novel force-temperature model for evaluating internal forces in CFRP by means of infrared thermography

Real-time Evaluating Temperature-Dependent Interfacial Shear Strength of Thermoplastic Composites Based on Stress Impedance Effect of Magnetic Fibers

Modeling the Failure Behavior of Cfrp Laminates Subjected to Combined Thermal and Mechanical Loadings

Three-dimensional Modeling and Experimental Validation of Thermomechanical Response of FRP Composites Exposed to One-Sided Heat Flux

Fatigue Characterization Study of CFRP under Hygrothermal Environment Based on Continuum Damage Mechanics Model

Inspection Of Defects In Cfrp-Foam Layered Structure Composite Plates Of Aerospace Materials Using Lock-In Thermography

Non-destructive Testing of Airfoil Based on Infrared Lock-in Thermography

Modeling the Effects of Interfacial Properties on the Temperature Dependent Tensile Strength of Fiber Reinforced Polymer Composites

Enhancing resistance to low-velocity impact of electrospun-manufactured interlayer-strengthened CFRP by using infrared thermography

Temperature-dependent strength modeling of fiber-reinforced composites considering critical properties evolution

Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP

A Mesomechanical Model for Predicting the Degradation in Stiffness of Frp Composites Subjected to Combined Thermal and Mechanical Loading

A Coupled Mechanical and Electrical Model Concerning Piezoresistive Effect of CFRP Materials

Thermoresistive effects of carbon fiber reinforced polymer based on stress mode

Carbon fiber composites inspection and defect characterization using active infrared thermography: numerical simulations and experimental results

Controllable Three-Dimensional Thermal Field for Enhancing Tensile Strength of Additive Manufactured Continuous Fiber Reinforced Composites: Modeling, Simulation, and Experiment

Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography

Intralaminar Crack Detection for Carbon Fiber Reinforced Polymers Based on Laser-Line Thermography

Experimental characterisation and constitutive modelling of the intra-ply tensile and shear properties of unidirectional fibre reinforced thermoplastics (UD FRTPs) under solid-state stamp forming conditions

Study on In-Plane Thermal Conduction of Woven Carbon Fiber Reinforced Polymer by Infrared Thermography

Internal shear damage evolution of CFRP laminates ranging from -100°C to 100°C using in-situ X-ray computed tomography