Abstract:Bamboo is a fast-growing biobased building material with a high strength-to-weight ratio, and the combination of bamboo and wood provides an environmentally friendly alternative for building construction. A new type of laminated bamboo–timber composite column was proposed to improve the compressive performance of timber columns, which was expected to obtain better mechanical performance. Bamboo scrimber and Douglas fir were combined to form laminated bamboo–timber composite columns for the experimental study. Axial compression tests were carried out on 5 groups of 15 composite columns. The failure modes of the composite columns were assessed. The laws of axial displacement, lateral displacement, axial strain, ultimate bearing capacity and stiffness were analyzed. Finally, the bearing capacity of the composite columns was calculated by referring to the design specification for timber structures. The results indicated that the composite columns exhibited three failure characteristics. The ultimate bearing capacity and stiffness of the bamboo–timber composite columns increased with increasing amount of bamboo scrimber. The ultimate load of the bamboo–timber composite columns was increased by 23.0–94.6%, while the stiffness was increased by 9.1–38.4%. In addition, the bearing capacity of composite columns was calculated according to two standards. The experimental values of the bamboo–timber composite columns are in good agreement with the theoretical values, and the errors are within 8%.

Mechanical Behavior of Composite Column Reinforced Paulownia Wood Sandwich

Mechanics Properties of Paulownia Core Sandwich Composites

Axial Compression Behaviour of Bamboo-Wood Composite Columns Fabricated with Glubam and Laminated Veneer Lumber

EXPERIMENTAL RESEARCH ON THE FLEXURAL PROPERTIES OF PAULOWNIA WOOD CORE COMPOSITE SANDWICH PANEL REINFORCED BY LATTICE WEBS

The Flexural Behaviour of Composite Sandwich Beams with a Lattice-Web Reinforced Wood Core

EXPERIMENTAL AND THEORETICAL STUDY OF COMPOSITE SANDWICH COLUMN UNDER AXIAL COMPRESSION

Bending Performance of GFRP-wood Sandwich Beams with Lattice-Web Reinforcement in Flatwise and Sidewise Directions

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Flexural performance test of carbon fiber reinforced composite sandwich beams with cedarwood core

Densification of fast-growing paulownia wood for tough composites with stab resistance

Bending properties of U-shaped FRP composite sandwich panels

Compression Strength of Hollow Sandwich Columns with GFRP Skins and a Paulownia Wood Core

Impact Test of Composite Sandwich Beam with Built-in FBG Sensor

Deformation and Failure Behavior of Wooden Sandwich Composites with Taiji Honeycomb Core under a Three-Point Bending Test

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Experimental Study on the Flexure Property of Bamboo-Wood-gfrp Sandwich Beams

Mechanical behavior of laminated bamboo–timber composite columns under axial compression

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

Interface Delamination Damage Mechanism of Paulownia Wood Sandwich Beams under Low-velocity Impact

EXPERIMENTAL STUDY ON INTERFACE PERFORMANCE OF GFRP COMPOSITE SANDWICH COLUMN WITH WOOD-PLASTIC COMPOSITE CORE

Modification of Grooved Paulownia Wood Sandwich